White climate chamber 38m³ including sunlight simulation WK 40'/40-120/So -40° to +120°C

White

Type: WK 40'/40-120/So

White Climate Chamber Air-Cooled

Control and Regulation with S!MPAC

Technical Data:

Test Chamber and Unit Dimensions:

Internal dimensions (net) Height approx. 2150 mm Width approx. 3000 mm Depth approx. 6000 mm
Recirculation system (at chamber rear wall) Width approx. 800 mm
External dimensions with machine unit and without control cabinets
Height approx. 3360 mm Width approx. 3320 mm Depth approx. 8620 mm
Machine room, attached to the chamber rear wall
Height approx. 2340 mm Width approx. 3320 mm Depth approx. 1500 mm
Electrical control cabinet, side-mounted on base frame
Height approx. 2340 mm Width approx. 2400 mm Depth approx. 600 mm

Color:
Control cabinet: RAL 5019
Chamber exterior: RAL 9010

Chamber door (double-leaf)
Height approx. 2150 mm Width approx. 3000 mm

Personnel door (single-leaf) in side wall
Height approx. 1900 mm Width approx. 900 mm

Door window in chamber door (1 piece) (stand wing)
Height approx. 600 mm Width approx. 450 mm

Door window in personnel door (1 piece) (stand wing)
Height approx. 600 mm Width approx. 450 mm

Lighting (switch next to personnel door)
4 pieces of incandescent bulbs 60W

Pass-throughs 4 pcs. 125 mm ∅

Emergency stop button
Inside the door, secured against unintentional activation with a metal bracket

Floor load capacity
30,000 N/m² (surface load);
2,500 N per polyamide wheel Ø100mm;
4,000 N with one wheel with 4 cm²

Ceiling breakthrough for sunlight simulation system:
Ceiling breakthrough (clear dimensions of the lower pane)
Length approx. 600 mm Width approx. 700 mm
Quantity: 10 pieces
Ceiling load: 10 SoSi spotlights + 1 person 90 kg

Working range temperature:
Temperature range −40 °C ... +120 °C (discontinuous)

Cooling speed:
approx. 1 K/min. linear from 80°C to -40°C with test specimen mass and without thermal load,
measured at the outlet of the recirculation system.
At temperatures < (-20°C) the recirculation volume is reduced by 50%.
(e.g. PV 1200)

Heating speed:
approx. 1 K/min. linear from -30°C to +90°C with test specimen mass and without thermal load,
measured at the outlet of the recirculation system.
(e.g. PR 308.2)

Test specimen mass: 600 kg aluminum (vehicle – partial body)

Working range climate without sunlight simulation:
Temperature range: +10 °C ...+95 °C
Temperature stability: ≤ ± 0.5 K (temporal)
Temperature stability: ≤ ± 2 K (spatial)
Humidity range: 20 ... 80 % r.H., without thermal load
Dew point temperature range: -2 °C ...85 °C without thermal load

Working range climate with sunlight simulation:
Temperature range: +23 °C ...+50 °C
Temperature stability: ≤ ± 0.5 K (temporal)
Humidity range: 20 ... 70 % r.H., with thermal load
Dew point temperature range: -2 °C ...43 °C without thermal load
Thermal load of SoSi: Max. 10 kW

Temperature and humidity stabilities:

Temperature
For the temperature in the climate and temperature range, the following maximum deviation
(including measurement uncertainty and with test specimen) is specified:
Outlet after 15 minutes: ±1K
Inlet after 45 minutes: ±1.5K (external sensor)

Humidity
For the relative humidity at the operating point 80°C / 80% r.H.
the following maximum deviation (including measurement uncertainty and with test specimen) is specified:
Outlet after 30 minutes: ±3% r.H.
Inlet after 60 minutes: ±3% r.H. (external sensor)

Connection and consumption data:

Cooling unit air-cooled, maximum air temperature +38°C
Refrigerant R 404 A and R23
Operating weight condenser climate circuit: approx. 430 kg
Operating weight condenser climate circuit: approx. 770 kg
Water supply for humidifier:
approx. 40 l/h = 40 kg/h installed steam output,
demineralized water, electrical conductivity 5-20 μS/m

Power connection: 400 V; 3 PH + N + PE; 50 Hz
Connection value: 250 kVA, 350 A
Connection according to VDE 0110 Group 2: 5x185 mm2 CU
Site-specific protection: 355 A
Recirculation volume (frequency-controlled): 24,000 to 28,000 m³/h
Frequency converter basic setting: 50% (achievement of parameters)

Technical data sunlight simulation:
Manufacturer: BF Engineering GmbH
Type: G-BEM-1119
Number of lights: EPSU 2 x 2k_HQI
Ballast: 10
Ignition device: IGC-4k-03
Light source: OSRAM HQI 2000W High Flux
3〜/ N / PE / AC 400VAC 50Hz
5x16mm²
Rated power: 26 kW
Rated current: 63 A
AC 230V, DC 24V

Condition: used

Scope of delivery: (See image)

(Changes and errors in the technical data, specifications are subject to change!)

Further questions can be answered by phone.