CTS Climate Test Chamber CW-60/5.5 -60°C to +100°C 5500 liters (5.5 m³)
Item ID: 24907
Condition: Used
Stock: Only ${ $store.getters['24907/currentItemVariation'].stock.net } in stock
PAYMENT METHODS:
²
* Excl. VAT excl. Shipping
CTS
CTS CW‑60/5.5 – Climate Test Chamber Water-Cooled
The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized,
walk-in or drive-in climate chamber for conducting temperature
and humidity tests on multiple specimens simultaneously.
Device Description
The climate test chamber can test the function or material properties of a test specimen
under temperature and humidity influences.
The good air circulation with a correspondingly high recirculation volume ensures
effective transfer to the test specimen.
The air treatment area is located at the back of the interior space.
The units are located behind the device in a separate frame and are easily accessible.
The control system is housed in a separate control cabinet.
The control panel is integrated into the control cabinet door.
To dehumidify the test chamber, the test cell is equipped with a self-regenerating compressed air dryer.
The test chamber can be flushed with fresh air via a blower.
Technical Performance Data:
Temperature Tests:
Temperature range -60 °C to +100 °C
Temperature deviation ±0.5 to 1 K over time
Temperature change rate linear with test specimen
and with heat input, measured in the supply air
Heating: 2 K/min from -40 °C to +85 °C
Cooling: 2 K/min from +85 °C to -40 °C
Climate Tests:
Temperature range +10 °C to +90 °C
Humidity range 10 % to 95 % relative humidity
in the dew point range +5 °C to +89 °C
Temperature deviation ± 0.5 K over time
Humidity deviation ±1 - ±3 % r.H. over time
The technical data refer to an ambient temperature of +25 °C,
nominal voltage 400 V, without test specimen, without radiation, and without additional devices.
Dimensions:
Interior dimensions (test room / usable space):
Volume: approx. 5,500 liters (5.5 m³)
Interior dimensions (approx.): Height: 2300 mm Width: 1600 mm Depth: 1550 mm
Exterior dimensions: Height: 2800 mm Width: 2250 mm Depth: 5000 mm
Operating Data:
Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz
Nominal power: 58.3 kW (including 5 sockets)
Nominal current: 86.0 A
Protection class IP 54
Technical Design:
Cooling unit
water-cooled, low noise, semi-hermetic,
continuously variable power adjustment through electronic
monitoring and control system,
environmentally friendly refrigerants R 23 / R 404 A
Notes
Viewing by appointment possible (46325 Borken)
Shipping by freight forwarder possible – Costs & organization upon request
Scope of delivery: (See image)
(Changes and errors in the technical data, specifications are reserved!)
We would be happy to answer any further questions by phone.
Switch to environmentally friendly refrigerant
The following work can be performed on climate chambers. Please contact us if you are interested.
- Extraction and proper disposal of the previous refrigerant
- Replacement of necessary components, if unavoidable
- Evacuate the circuit and refill it with R 452A, for example.
- Checking / adjusting overheating in expansion valves
- Leak test
- Test run of the system
