TIRA Walk-in Climate Simulation Chamber TCZ / TTZ 4036 S (m) -2K Temperature Range: -40 to +140°C

TIRA

Type: TCZ 4036 S (m) -2K

Walk-in Climate Simulation Chamber

Description:
 
System Structure:
 
The system consists of the following main components:
Walk-in, Insulated Chamber
Air Treatment Room
Machine Room with Humidification System and Control Cabinet

The insulated chamber serves as the test area and includes the air treatment room.
In the air treatment room, the air is conditioned (cooled/heated) and
dehumidified or humidified, and circulated by a fan.

A humidifier located in the machine room provides the steam required for
humidification.

The machine unit supplies the air treatment room with the necessary energy
through the refrigeration components (evaporator and dehumidifier).

The control cabinet located in the machine room houses all control and
regulation units as well as electrical components.
The control system ensures constant temperature regulation and stable
control behavior.
The control panel located on the left side wall of the climate chamber
allows for comprehensive operation.

Technical Data:

Performance Range for Temperature Testing:

Temperature Range -40...+140°C
Temperature Consistency, Inlet Air: (temporal) ≤ ± 1.0°C
without thermal test chamber load according to (DIN 50011 Τ13) EN 60068

Temperature Consistency, Inlet Air: (spatial) ≤ ± 1.5°C
without thermal test chamber load according to (DIN 50011 Τ13) EN 60068

Heating Rate approx. 2.0 K/min
without thermal test chamber load (according to DIN 50011 /
EN 60068) or test specimen in the temperature range of -30°C...+85°C
Heat Compensation approx. 20 kW in the temperature range from +80°C to -20°C

Performance Range for Climate Testing
Temperature Range +10...+95°C
Humidity Operating Range 10...approx. 95% r.H
without thermal test chamber load

Dew Point Temperature Range +5...+89°C
without thermal test chamber load

Humidity Deviation, Inlet Air: (temporal) ≤ ± 2.5% r.H
without thermal test chamber load according to (DIN 50011 Τ13) EN 60068
Accuracy Class 2 (measured in the center of the test chamber)

Humidity Deviation, Inlet Air: (spatial) ≤ ± 5.0% r.H
without thermal test chamber load according to (DIN 50011 Τ13) EN 60068
Accuracy Class 2 (measured in the center of the test chamber)

Performance Range for Climate Testing with Heat Compensation
Temperature Range +10...+95°C
Humidity Operating Range 10...approx. 70% r.H
with max. 20 kW heat compensation

Dimensions: Test Chamber (WxDxH) approx. 2510 x 5270 x 2760 mm
Dimensions: External Dimensions (WxDxH) approx. 2910 x 8740 x 3320 mm
Clear Door Passage Test Chamber Door (WxH) 2510 x 2760 mm with window 1000 x 1000 mm, heated

Design:
Air Flow: Inlet Air: Perforated sheet at the rear wall, in the ceiling area
Exhaust Air: Perforated sheet at the rear wall, in the floor area

Temperature Control:
Direct cooling through evaporation of
refrigerant in a finned heat exchanger:
Heating with electric resistance heater

Dehumidification:
Direct dehumidification through evaporation of
refrigerant in a heat exchanger

Interior Cladding: Stainless Steel
Exterior Cladding: Steel sheet, galvanized, plastic-coated
Floor Design: Stainless Steel, smooth finish
Floor Load Capacity 15000 N/m²
Wheel Load (Contact Area ≥4cm²) 1500 N/Wheel

Door: Double-leaf door, stainless steel, painted outside with
window (WxH) 1000x1000 mm

Test Chamber Lighting: 4 Spotlights at 500W each
Insulation Two-layer insulation, 80 mm PUR foam,
120mm mineral wool

Refrigeration Unit (2 pieces) Blitzer
Refrigerant, single-stage R449A
Refrigerant, single-stage R449A
Refrigeration Machine Oil SEZ 32
Steam Humidifier Steam Humidifier

Color Scheme:

Chamber RAL9010, white
Door RAL9010, white
Machine Unit RAL 7035, light gray
Control Cabinet RAL 7035, light gray

Weights:

Complete System
(includes machine set, control cabinet, and humidification system) approx. 7700 kg
Machine Set KB 2x 127 approx. 1200 kg
Control Cabinet approx. 280 kg
Humidification System approx. 115 kg

Connections:

Nominal Voltage 400 V +6%/-10% 3/PE 50Hz
Nominal Power 195 kW
Nominal Current 315 A
Fixed Connection
Site-specific Protection 400 A slow
Main Switch built into the control cabinet housing
Humidification Water according to installation plan
Water Supply and Drainage according to installation plan

Weight: 10495 kg

Condition: used

Scope of Delivery: (See Image)

(Changes and errors in the technical data are reserved!)

We would be happy to answer any further questions by phone.