CTS Temperature Testing Chamber (Conditioning Device for External Test Rooms) -40°C to +180°C 1000 l TSR-30/1000

CTS

Type: TSR-30/1000

Water-cooled

The type designation of the CTS cabinet series is composed as follows:
e.g. Type TSR -30/1000
1) T means: Temperature
2) S means: Stress-Screening
3) R means: external conditioning
4) -30 means: lower temperature -30 °C
5) 1000 means: 1000 liters test chamber volume

Technical performance data:
A) TSR-30/1000 base unit without hose connections,
i.e. when used as a standalone temperature test chamber

Temperature tests:
Temperature range -40°C to +180°C
End temperature -45°C

Temperature deviation ≤ ±0.3 K over time
Temperature change rate according to IEC 60068-3-5
Heating 6.0 K/min
Cooling 5.0 K/min

Heat radiation
approx. 5000 W at +20°C
approx. 4200 W at ± 0°C
approx. 3000 W at -20°C
The technical data refer to an ambient temperature of +25 °C,
nominal voltage 400V, without test specimen, without radiation and without additional devices.

Air flow rate
approx. 2000m³/h

B) TSR-30/1000 base unit with hose connections,
for connection to a site-specific external test chamber

Temperature tests:
Temperature range -30°C to +170°C
Temperature deviation ≤ ±0.1 to 0.5 K over time

Temperature change rate on average,
measured with a short-circuited circuit

Heating 4.0 K/min
Cooling 4.0 K/min
in the range of +150°C to -10°C
The technical data refer to an ambient temperature of +25 °C,
nominal voltage 400V, without test specimen, without radiation and without additional devices,
measured with a short-circuited circuit

Caution: The site-specific external test chamber must be absolutely airtight and properly insulated,
any penetrations must be optimally sealed on site.

Dimensions:
Test volume 1000 liters
Recirculation connection Ø 200 mm
Test chamber dimensions Height 900 mm Width 1000 mm Depth 1100 mm
External dimensions Height 1950 mm Width 1270 mm Depth 2245 mm

Technical design:
Cooling unit:
water-cooled, low noise full hermetic
infinitely variable power adjustment through
electronic monitoring and control system,
environmentally friendly refrigerant R404A

Door:
fully opening door, door hinge on the left,
one-hand operation, lockable.

Insert rack:
Stainless steel, support area 970 x 980mm
Load per rack max. 35 kg
Total load at max. rack loading 100 kg

Test chamber lighting: Halogen lamp 20 W, 12 V

Control:
- 32 Bit - Controller
- LCD control panel

Operating data:
Electrical connection 400 V +6/-10 %, 3/N, 50 Hz
Nominal power 13.3 kW
Protection class IP 22
Sound pressure level < 60 dB(A)
Weight approx. 850 kg

For your safety as a buyer, the following information!

The following points will be carried out in advance on our offered chambers:
1. Function check and replacement of necessary components
2. If necessary, new filling with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers will undergo a documented test run.

Condition: used

Scope of delivery: (See image)

(Changes and errors in the technical data are reserved!)

Further questions can be answered by phone.