Binder Drying and Heating Chamber Type: FD 23
Item ID: 852
Condition: Used
Stock: Only ${ $store.getters['852/currentItemVariation'].stock.net } in stock
PAYMENT METHODS:
²
Binder Drying and Heating Chamber with Forced Circulation
Here we offer a Binder drying and heating chamber.
Drying and heating chambers with forced circulation
A BINDER drying chamber from the FD series is used whenever particularly fast drying and sterilization are required.
Thanks to its completely homogeneous temperature distribution, rapid dynamics, and powerful fan, it saves valuable time.
FD 23
External dimensions
Width (mm) 433
Height (including feet) (mm) 492
Depth (mm) 516
Plus door handle and exhaust pipe (mm) 85
Wall distance at the back (mm) 100
Wall distance on the side (mm) 100
Exhaust pipe (outer Ø mm) 52
Steam chamber volume (l) 36
Number of doors (pieces) 1
Internal dimensions
Width (mm) 222
Height (mm) 330
Depth (mm) 277
Internal volume (l) 20
Insertion grid (number series/max.) 2 / 3
Load per grid (kg) 12
Maximum total load (kg) 25
Weight (empty) (kg) 33
Temperature data
Temperature range approx. 5 °C above room temperature up to (°C) 300
Spatial temperature deviation
at 70 °C (± K) 0.8
at 150 °C (± K) 2.2
at 300 °C (± K) 4.3
Temporal temperature deviation at 70 °C (± K) 0.3
Heating time 1)
to 70 °C (Min.) 7
to 150 °C (Min.) 22
to 300 °C (Min.) 45
Recovery time after 30 sec door open 1)
at 70 °C (Min.) 2
at 150 °C (Min.) 4
at 300 °C (Min.) 9
Air exchange data
Air exchange
at 70 °C (x/h) 59
at 150 °C (x/h) 64
at 300 °C (x/h) 53
Electrical data
IP protection class according to EN 60529 IP 20
Nominal voltage (±10 %) 50 / 60 Hz (V) 230
Nominal power (kW) 0.8
Energy consumption
at 70 °C (W) 145
at 150 °C (W) 300
Type: FD 23
Condition very good
Scope of delivery. (See image)
Technically flawless (function guarantee)
Switch to environmentally friendly refrigerant
The following work can be performed on climate chambers. Please contact us if you are interested.
- Extraction and proper disposal of the previous refrigerant
- Replacement of necessary components, if unavoidable
- Evacuate the circuit and refill it with R 452A, for example.
- Checking / adjusting overheating in expansion valves
- Leak test
- Test run of the system
