Zwick Material Testing Machine AllroundLine Z100 TEW Floor-Standing 100kN Test Machine

Zwick Roell

Type: Z100 TEW

Technical Data

Item No.: 1004501
Test Force Fmax: 100 kN

Test Chamber
Test Chamber Height:
Total Height: 1934 mm
Height of Lower Test Chamber, without Installations: 1755 mm
Height of Upper Test Chamber, without Installations (additional traverse required): 1800 mm
Test Chamber Width: 640 mm

Load Frame
Load Frame Height:
Height without Stand Profiles: 2169 mm
Height with Stand Profiles: 2284 ... 3094 mm
Load Frame Width:
Width without Stand Profiles: 960 mm
Width with Stand Profiles: 1136 mm
Width with Stand Profiles and Machine Electronics: 1329 mm
Load Frame Depth:
Depth: 140 mm
Depth without Stand Profiles, with Drive Base: 584 mm
Depth with Stand Profiles: 781 mm

Weight:
with Machine Electronics without Stand Profiles, approx.: 470 kg
optional Stand Profiles (one pair), approx.: 34 kg
with typical Installations, approx.: 570 kg

Footprint:
Net Stand Area: 0.01 m2
Load Frame Ground Area: 0.867 m2
Specific Floor Load:
based on typical Installations: 559 kN/m2
with 50% Safety: 839 kN/m2

Ceiling Load:
based on typical Installations: 6 kN/m2
with 50% Safety: 9 kN/m2

Coating: RAL 7021 and RAL 7038
Ambient Temperature: +10 ... +35 °C
Relative Humidity (non-condensing): 20 ... 90 %
Average Sound Pressure Level at vmax measured 1 m from the front of the machine: 66 dB(A)

Drive
Traverse Speed vmin ... vmax 0.0001 ... 1500 mm/min
Traverse Return Speed, max.: 2500 mm/min
Deviation from Set Drive Speed, max.: 0.05 % of vist
Drive Path Resolution: 0.484471 nm
Positioning Repeatability (without Direction Reversal): ±2.0 μm
Controller: adaptive
Cycle Time: 1000 Hz
Input Values of the Power Supply
Power Supply Connector: CEE Three-Phase Connector according to IEC 60309
Power Supply: 400 V, 3Ph/N/PE
Permissible Voltage Fluctuation: ±10 %
Current Consumption per Phase, max.: 9 A
Power Consumption (Full Load), approx.: 6 kVA
Power Frequency: 50/60 Hz
Protection of the Power Supply Connection Line: 16 A Circuit Breaker Type B or C
Short-Circuit Cut-Off Capacity (ICU): 160 A
Protection Class according to DIN EN 60529: IP 32
Power Output for Peripheral Devices
Power Socket: CEE 7 (Schuko)
Power Voltage: 230 V, 1 Ph/N/PE
Permissible Voltage Fluctuation: ± 15 %
Load, max.: 1 kW

Remote Control testControl II

Safety Device
The safety device is made of transparent, impact-resistant material (polycarbonate)
and is mounted at the front of the testing system.

Force Transducer 100 kN
Type: Xforce K
Item No.: 318932
Nominal Force Fnom: 100 kN

Hydraulic Unit
The hydraulic unit provides the hydraulic pressure required for the operation of hydraulic specimen holders and
testing devices. The hydraulic pressure is generated by a 2-stage compact pump unit.
The hydraulic unit is operated via the standalone remote control
and through the testing software.
Height: 584 mm
Width: 502 mm
Depth: 817 mm

Hydraulic Specimen Holder
The hydraulic specimen holder closes on both sides.
Bi-directional closing specimen holders always close symmetrically to the tensile axis.
This ensures that the specimen is clamped exactly axially. The adjustment of the thickness is not necessary. This is
a significant advantage, especially for soft specimens or varying specimen thicknesses.
Test Force, max. (Fmax): 70 kN
Closing Force, max. (at 300 bar): 110 kN

The hydraulic specimen holders are designed for tensile, compressive, and alternating load tests (static,
dynamic, cyclic) and are suitable for the following application areas:

Application Area
- Specimen Material:
Ferrous and non-ferrous metals, structural sheets, sintered metal materials, hard metals,
metal-ceramic composites, hard and reinforced plastics, composite materials,
similar materials
- Specimen Shape:
Flat specimens, round specimens (strips and shoulder specimens), especially also small
specimens with short clamping length
- Type of Load:
Tensile, compressive, alternating load

Length Change Transducer makroXtens
The extensometer is a displacement measurement system that determines the length change between two
points.
This versatile transducer is characterized by a modular design.
For example, the manually operated
length change transducer can be converted into an automatically engaging
length change transducer.
The measuring sensors are applied to or lifted from the specimen via the sensor actuation.
The measuring sensors are optional and are not included in the delivery of the measurement system.

Take-up Force: ≤ 0.05 N
Clamping Force of the Measuring Sensor, manually adjustable: 0.1 ... 2 N
Resolution in connection with:
300 mm Lever Arm Length: 0.006 μm
450 mm Lever Arm Length: 0.009 μm
600 mm Lever Arm Length: 0.012 μm
Initial Measurement Length, max.: up to 100 mm
Specimen Width, max.: 60 mm
Specimen Thickness/Diameter, max.: 30 mm
Dimensions:
Height: 375 mm
Width: 167 mm
Depth: 375 mm

Testing Software testXpert 3 v1.2

Year of Manufacture: 2018

Condition: used

Scope of Delivery: (See Image)

(Changes and errors in the technical data, specifications are subject to change!)

Further questions can be answered by phone.