Weiss Walk-In Salt Spray Chamber S-KWT 30''/20-60 IU

White

Type: White S-KWT 30'/20-60 IU

Walk-in Salt Spray Test Chamber

Water-cooled

Climate Test Chamber for Corrosion Cyclic Loading White Type S / KWT 30'/20-60 IU

Description of the System:

The chamber is used to conduct corrosion and condensation tests.

Technical Data:

Salt Spray Chamber Type S-KWT 30'/20-60 IU

Dimensions of Test Chamber, Units, and Control Cabinet

Chamber Internal Dimensions: Height of Side Wall approx. 2000 mm Height to Ridge approx. 2900 mm Width approx. 2400 mm Depth approx. 4500 mm

Usable Width: approx. 2200 mm

Chamber External Dimensions: Height approx. 3450 mm Width approx. 2840 mm Depth approx. 5550 mm

Test Room Door Double-leaf: Height approx. 2000 mm approx. 1800 mm Width

Design of the Test Room Door: Mounted Door with Threshold

Door Window: Height approx. 600 mm Width approx. 450 mm

Placement of Unit Components Behind the Salt Spray Chamber

Salt Solution Storage Tank: Customer-supplied

Salt Solution Preparation Tank with Pump: Customer-supplied

Unit with Brine Thermostats etc. Height approx. 2000 mm Width approx. 1900 mm Depth approx. 700 mm

Container for Condensate Water Test: Height approx. 1100 mm Width approx. 1050 mm Depth approx. 450 mm

2x Pressure Humidifier Station (on Chamber Side and Back Wall) Width approx. 1260 mm Depth approx. 300 mm

Control Cabinet: Height approx. 2000 mm Width approx. 2400 mm Depth approx. 600 mm

Materials and Equipment of the Test Chamber:

Insulation approx. 120 mm PU Foam (CFC-free)
Interior Cladding Aluminum Sheet White Coated RAL 9010,
Exterior Cladding Aluminum Sheet White Coated RAL 9010,
Test Room GFRP-Polyester, fiberglass reinforced in light gray color

Interior Roof Designed as a Gable Roof
Floor Design Walkable
Floor Load Max 800kg/m² (as Surface Load)
Floor Support Grating Double Layer
Pipe Passages 2 pieces ∅ 100 mm
Lighting (3 pcs.) 58 W, Switch on Door Outside or via Touch
Condensate Drain Drain Channel in the Floor with 2 pcs. Drain DN 30

Flush Air Supply approx. 800 m³/h
Test Room Heating by Plastic Coated, Internally Suspended Low Voltage Heaters

Working Areas:

Salt Mist Tests DIN EN ISO 9227

Condensate Water Tests DIN EN ISO 6270-2 CH, AHT, AT

Standard Climates DIN 50 014, Class 2 - 23-50-2 (23 °C / 50 %)

Laboratory Change Climate Test VDA New, Voestalpine - Cycles A, B, C

Climate Change Test P-VW 1210

Corrosion Change Test VDA 621-415

Chamber Temperature Range -20... +60°C Discontinuous

Chamber Climate Range +10…+60°C Discontinuous 15…95% r.H.

Dew Point Temperature 9…49°C

The above performance specifications apply at an ambient temperature (in the installation room) of +23°C
and in a steady state without thermal load, measured at the outlet.

Connection and Consumption Data:

Cooling Water Return Cooling Water (+6 / +12 °C)
Cooling Water Quantity (max.) approx. 6.6 m³/h
Cooling Water Connections R 1½ "
Demineralized Water for Humidifier R 1/2" (min. 2 bar) max. approx. 50 l/h
Compressed Air Connection R 1/2" (max. 6 bar)
Compressed Air Quantity max. 20 Nm³/h
Outside Air and Flush Air Intake from Customer-supplied Air Duct
Exhaust DN 200 (Exhaust Duct to Outside Customer-supplied)

Power Connection 3/N/PE AC 400V ±10% 50 Hz (see Electrical Circuit Diagram)
Connection Value approx. 75 kVA
Supply Line 5 x 70 mm²
Customer-supplied Protection 3x 160 A

Condition: used

Scope of Delivery: (See Image)

(Changes and errors in the technical data are reserved!)

For further questions, we are happy to answer them by phone.