Weiss Climate Test Chamber WKL 100/40 -40...+180°C 100 Liters with Humidity

Weiss

Type: WKL 100/40

Climate Test Chamber Air-Cooled
with Humidity -40 to +180°C

Specifications for Temperature Tests:

Temperature Range -40 to +180°C

Temperature Differences in Steady State
Temperature Fluctuation over Time in Center of Usable Space ± 0.3 to ± 1 K
Spatial Temperature Deviation ± 0.5 to ± 2 K

Rate of Temperature Change
Heating 3.5 K/min
Cooling 5 K/min
Heat Compensation max. 1100 W

Specifications for Climate Tests:

Data for Humidification System
Content of the Reservoir Approximately 13 l
Water Quality Deionized
pH Value 6 – 7
Conductivity max. 20 μS/cm
Water Consumption at Constant Temperature +40 °C, 92 %r.H. 2 l / 24 h
Temperature Range +10 to +95 °C
Humidity Range 10 to 98 %r.H.

Temperature and Humidity Differences (in Steady State)
Temperature Fluctuation over Time in Center of Usable Space ± 0.3 to ± 0.5 K
Spatial Temperature Deviation ± 0.5 to ± 1.5 K
Humidity Fluctuation over Time in Center of Usable Space ± 1 to ± 3 %r.H.

Data for Mechanical Load:
Maximum Load of Test Chamber Floor 25 kg
per Insert Rack 10 kg
Total Load of Rack Supports 50 kg

Conduct 50 mm ∅

Interfaces: Ethernet Interface (RJ45), USB Interface

Data for Operation:
Test Chamber Lighting Halogen Bulb 24V, 50W
Nominal Voltage 1/N / PE AC 230 V ± 10 % 50 Hz
Nominal Power 3 kW
Nominal Current 13 A
Fuse on Site 16A Slow
Protection Class
Control Cabinet IP 22 and Control Panel IP 54

Heat Output Air-Cooled Test Chambers:
Max. Heat Output to Environment 2000 W

Noise Measurement
Sound Pressure Level Free Field Measurement at 1 m Distance from Front and 1.6 m Height
Approximately 56 dB(A)

Test Chamber Volume Approximately 100 Liters
Weight 190 kg

Refrigerant: R404A

For Your Safety as a Buyer, the Following Information!

The following points will be carried out on our offered chambers in advance:
1. Function Check and Replacement of Necessary Components
2. If Necessary, New Filling with Legally Compliant Refrigerant
3. Leak Test with Certificate
4. After Successful Inspection, the Chambers will be Subjected to a Documented Test Run.

Condition: used

Scope of Delivery: (See Image)

(Changes and Errors in Technical Data are Reserved!)

Further Questions Can Be Answered by Phone.