Vötsch Temperature Testing Chamber with Spraying Device -30 to 80°C 500 Liters VBT 03/500

Vötsch

Type: VBT 03/500

Air-cooled

Temperature testing chamber with spraying system

Technical Description:

Data for temperature tests without water:

Temperature range -30°C to +80°C

Temperature deviation in steady state
according to IEC 60068-3-5 depending on the test room temperature

temporal ± 1 K

Rate of temperature change according to IEC 60068-3-5

Heating: approx. 2 K/min.
Cooling: approx. 2 K/min.

Data for temperature tests with water

Temperature range +5°C to +80°C
Possible water level -10 mm to 540 mm

Water level = -10 mm
The water level is below the insert grid

Water level = 0 mm
The water level is at the upper edge of the insert grid

Data for standard spraying system

Number of spray nozzles 6
Spray amount per nozzle 0.5 l/min

Data for spraying system according to EN 539-2, Method B

Number of spray nozzles 6
Spray amount per nozzle 4.5 l/min
Additional flooding nozzles 2
Spray amount additional nozzle 6 l/min
Compressed air consumption approx. 3 m³/h

Data for water tank with preheating

Volume approx. 2000 l
Temperature range for preheating +5°C to +40°C
Duration of temperature change
Cooling from +18°C to +5°C approx. 15 h
Heating from +15°C to +40°C approx. 10 h

Data for installation and operation:

Test room: Width 1120 mm Depth 840 mm Height 540 mm
Housing: Width 2700 mm Depth 1300 mm Height 1575 mm
Water tank: Width 1100 mm Depth 800 mm Height 2200 mm

Pass-throughs

1 pass-through ∅ 50 mm installed on the left

Test room volume: approx. 500 liters

Refrigerant R-404a

Electrical connection:

Nominal voltage 3/N/PE AC 400V ± 10% 50Hz
Nominal power approx. 26 kW
Nominal current approx. 44.0 A (neutral conductor loaded)
Protection 63 A gG, site-specific

Weight approx. 890 kg net

For you as a buyer, the following information for your safety!

The following points will be carried out in advance on our offered chambers:
1. Function check and replacement of necessary components
2. If necessary, new filling with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers will undergo a documented test run.

Condition: used

Scope of delivery: (See image)

(Changes and errors in the technical data, specifications are reserved!)

We would be happy to answer any further questions by phone.