Vötsch Temperature Testing Chamber Mini Test Chamber Temp. -70..180°C 37 Liters VTM 7004

Vötsch

Type: VTM 7004

Technical Description

Temperature Test Chamber Air-Cooled

Test Chamber Volume approx. 37 liters

Key Values for Temperature Tests  
Temperature Differences in Steady State according to IEC 60068-3-5

Temperature Range -70°C to +180°C, discontinuous

Temperature Fluctuation over Time in Center of Usable Space ±0.2 K to 0.5 K
Spatial Temperature Deviation ±0.5 K to 1.5 K
corresponds to Temperature Gradient 1 K to 3 K
Rate of Temperature Change according to IEC 60068-3-5
Heating: 5.3 K/min.
Cooling: 4.7 K/min.
Maximum Heat Compensation: 500 W
Calibration Values +23°C and +80°C

Data for Installation and Operation
Dimensions of Test Chamber Width 320 mm Depth 290 mm Height 400 mm
Overall Dimensions Width 1000 mm Depth 780 mm Height 630 mm

Pipe Entry:
1 Pipe Entry, Diameter 80 mm, installed on the left

Cooling Unit:
Low-noise Fully Hermetic Refrigeration Unit, air-cooled

Control Terminal: Mincontrol
Backlit Display
Clear Text Display
Password Protection
Input of Constant Values; Retrieval of Stored Test Programs
Software Temperature Limit Selector for min. and max. Chamber Temperatures
Error Clear Text Message

Control:
Microprocessor-Controlled Regulation and Monitoring System MINCON/32
32 Bit Technology
Integrated Program Controller
Error Diagnosis System
Program Memory for 100 Programs with a total of
1000 Sections, 250 Loops, and 9999 Cycles

Interface RS 232
for Communication with Customer's Computer,
Networking of up to 32 Devices optionally
possible via RS 485

Electrical Connection:
Nominal Voltage 1/N/PE AC 230V ±10% 50Hz
Nominal Power 0.9 kW
Nominal Current 6.0 A
Plug CH Plug, Type T23
Connection Cable 4.5 m
Protection 16 A slow, site-specific

Refrigerant R-404A/R-23

Weight: 140 kg net

Type: VTM 7004

For your safety as a buyer, the following information!

The following points will be carried out on our offered chambers in advance:
1. Function Check and Replacement of Necessary Components
2. If necessary, new filling with legally compliant refrigerant
3. Leak Test with Certificate
4. After successful inspection, the chambers will undergo a documented test run.

Condition: used

Scope of Delivery: (See Image)

(Changes and errors in technical data are reserved!)

Further questions can be answered by phone.