Vötsch Climate Test Chamber with Humidity -70 to 180°C 335 Liters VC 7034

Vötsch Climate Test Chamber

Here we offer you a Heraeus Vötsch climate test chamber.

Vötsch Climate Test Chamber with Humidity and Water Cooling

Touch Panel

Powerful 32 Bit Control, Monitoring, and Regulation System

Extremely Low Noise Level

Protection of Test Samples with Independent Temperature Measurement

Maintenance-Friendly Design

Large Window

Aerodynamic Airflow Design

Hermetically Sealed CFC-Free Refrigerant Circuit

Technical Description:

Specifications for Temperature Tests:

Temperature Range -70°C to +180°C

Temperature Deviation in Steady State according to IEC 60068-3-5 depending on the Test Room Temperature

temporal ±0.1 to ±0.5 K
spatial ±0.5 to ±2.0 K

Rate of Temperature Change according to IEC 60068-3-5

Heating: approx. 3 K/min.
Cooling: approx. 2 K/min.

Heat Compensation max. approx. 1000W

Specifications for Climate Tests:

Temperature Range +10°C to +95°C

Temperature Deviation in Steady State according to IEC 60068-3-5 depending on the Test Room Temperature

temporal ±0.1 to ±0.3 K
spatial ±0.5 to ±1.0 K

Distance of Measurement Points from Walls 100 mm

Humidity Range 10% to 98% r. H.

Dew Point Range -3°C to +94°C

Humidity Deviation in Steady State, depending on the Climate Value

temporal ±1.0% r. H. to ±3.0% r. H.

Heat Compensation 400 W at 25°C to 90°C

Humidity up to max. 90% r. H. is maintained

Data for Installation and Operation:

Test Room: Width 580 mm Depth 765 mm Height 750 mm
Housing (Installation Dimensions): Width 865 mm Depth 1595 mm Height 1780 mm

Pass-Throughs

1 pass-through ∅ 50 mm installed on the left
1 pass-through ∅ 125 mm installed on the right

Test Room Volume: approx. 335 Liters

Refrigerant R 452 A

Electrical Connection:

Nominal Voltage 3/N/PE AC 400V ± 10% 50Hz
Nominal Power approx. 4.1 kW
Nominal Current approx. 14 A (Neutral Conductor Loaded)
Plug Cekon 16 A
Connection Cable approx. 3.5 m
Protection 16 A slow, site-specific

Weight approx. 500 kg net

For your safety as a buyer, the following information!
The following points will be carried out in advance on our offered chambers:
1. Function check and replacement of necessary components
2. New filling with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers will undergo a test run monitored with calibrated devices.

Type: VC 7034

Condition: used

Scope of Delivery: (See Image)

(Changes and errors in the technical data are reserved!)
 
We are happy to answer any further questions by phone.