Vötsch Climate Test Chamber VTS 7130-15 -70°C to +180°C Test Room Ex-Protected. II 3G
Item ID: 24124
Condition: Used
Stock: Only ${ $store.getters['24124/currentItemVariation'].stock.net } in stock
PAYMENT METHODS:
²
* Excl. VAT excl. Shipping
Vötsch
Type: VTS 7130-15
Vötsch Climate Test Chamber Water-Cooled
Test Chamber Ex-Protected. II 3G
Technical Data:
External dimensions with hinges and door lock
Height 1995 mm, Width 1680 mm, Depth 1855 mm
External dimensions without hinges and door lock
Height 1995 mm, Width 1300 mm, Depth 1855 mm
Internal dimensions Height 950 mm, Width 1100 mm, Depth 950 mm
Test chamber volume: approx. 1300 liters
Pass-throughs:
The test chamber is equipped with pass-throughs on the right and left sides.
These allow measurement lines and testing equipment to be placed in the test chamber.
1 X R1 NW 125 mm
1 X L1 NW 50 mm
Data for temperature tests:
Temperature range -70°C to 180°C
Temperature deviation over time in the center of the usable space ± 0.3 to ± 0.8 K
Temperature deviation spatially ± 0.5 to ± 2 K
Temperature gradient 1 to 4 K
Rate of temperature change
Heating 16 K/min
Cooling 12.5 K/min
Test chamber lighting
Halogen bulb 24 V, 50W
3/N/PE AC 400V ±10% 50Hz
Rated power: 44.0 kW
Rated current: 63.0 A
Fuse on-site 100 A slow-blow
max. Heat output to the environment: 2.2 kW
Permissible test specimen weight
Total load of the shelf supports 100 kg
Test chamber floor 150 kg, Insert rack 50 kg
Weight: 1900 kg
For your safety as a buyer, the following information!
The following points will be carried out on our offered chambers in advance:
1. Function check and replacement of necessary components
2. If necessary, new filling with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers will undergo a documented test run.
Condition: used
Scope of delivery: (See image)
(Changes and errors in the technical data are reserved!)
We would be happy to answer any further questions by phone.
Switch to environmentally friendly refrigerant
The following work can be performed on climate chambers. Please contact us if you are interested.
- Extraction and proper disposal of the previous refrigerant
- Replacement of necessary components, if unavoidable
- Evacuate the circuit and refill it with R 452A, for example.
- Checking / adjusting overheating in expansion valves
- Leak test
- Test run of the system
