Feutron Climate Test Chamber 3707/06 Temp. -40°C to 150°C with Humidity and Sun Simulation

Feutron

Type: 3707/06

Feutron Climate Test Chamber with Solar Simulation

Temperature

Temperature range: -40...90°C

Climate range (without heat load) 10...85°C

Temperature difference, time during temperature operation ≤ ± 0.5 K/min

Temperature difference, time during climate operation ± 1.0... ± 1.5 K/min

Feutron Climate Test Chamber

Here we offer a Feutron Climate Test Chamber.

Feutron Climate Test Chamber

Temperature

Temperature range: -40...90°C

Climate range (without heat load) 10...85°C

Temperature difference, time during temperature operation ≤ ± 0.5 K/min

Temperature difference, time during climate operation ± 1.0... ± 1.5 K/min

Change rates

Heating 2.0 on average K/min

Cooling 2.0 on average K/min

The standard IEC 1646 is realizable with testing, solar modules with a maximum weight of 160kg and nonlinear ramps

(Setpoint jump)

Drying

Air drying condensation drying

Humidity

Air humidification steam humidification

Humidity range 10... 95 % r.H.

Humidity difference, time ≤ ± 3.0... ±5.0 %r.H.

Dew point range 8... 80.9 °C

Test chamber

Test chamber volume 7.0m³

Dimensions

Test chamber dimensions Width 1500 mm x Height 2250 mm x Depth 2000 mm

Swing door DIN right heated, i,l.. Width 900 mm x Height 2100 mm

Viewing window, heated with blackout flap and lockable Width 500 mm x Height 600 mm

Pass-through opening 2x on front side right ∅ 75 mm

Irradiation unit test chamber

Cutout 4x in side wall left for SC 2500 each 850 x 700 mm

Area to be irradiated when using SC 2500 1200 x 1200 mm

Radiation intensity at 1.0 m wall distance 1000 ± 10% W/m²

Lighting 1x Halogen lamp 200W

Cooling system Bitzer compressor semi-hermetic 2-stage, air-cooled

Condenser: Split condenser (outdoor installation winter control)

Refrigerant R507 /R23

Temperature control system

Cooling brine medium Tyfocor / water

Mixing ratio 50/50%

Density of cooling brine 1.072 kg/dm³

Filling volume approx. 80dm³

Pyranometer temperature range -40... 150°C

Max. radiation absorption 4000 W/m²

Spectral range (50% points) 305... 2800nm

Sensitivity (nominal) 7 µV/W/m²

Power supply test chamber

Electrical connection 400V, 3/N/PE, AC, 50Hz

Connection type Fixed connection

Max. simultaneous power requirement approx. 32.0 kW

Supply line fuse 3 x 63, Char C (A)

Power supply SolarConstant

Electrical connection 400V, 3/N/PE, AC, 50Hz

Connection type

Max. simultaneous power requirement approx. 30.0 kW

Supply line fuse 3 x 63, Char C (A)

External dimensions of the test chamber complete with: Equipment room/control cabinet

and control cabinet for SolarConstant 2500

External dimensions equipment room Width 3440 mm x Height 2580 mm x Depth 2950 mm

/Control cabinet Width 2200 mm x Height 1830 mm x Depth 1100 mm

External dimensions condenser, split Width 900 mm x Height 950 mm x Depth 2000 mm

Weight test chamber, total approx. 2700 kg

Weight condenser, empty 153 kg

Weight: 2700 Kg

Type: 3707/06

Condition: used

Scope of delivery: (See image)

(Changes and errors in the technical data are reserved!)

We would be happy to answer any further questions by phone.

Change rates

Heating 2.0 on average K/min

Cooling 2.0 on average K/min

The standard IEC 1646 is realizable with testing, solar modules with a maximum weight of 160kg and nonlinear ramps

(Setpoint jump)

Drying

Air drying condensation drying

Humidity

Air humidification steam humidification

Humidity range 10... 95 % r.H.

Humidity difference, time ≤ ± 3.0... ±5.0 %r.H.

Dew point range 8... 80.9 °C

Test chamber

Test chamber volume 7.0m³

Dimensions

Test chamber dimensions Width 1500 mm x Height 2250 mm x Depth 2000 mm

Swing door DIN right heated, i,l.. Width 900 mm x Height 2100 mm

Viewing window, heated with blackout flap and lockable Width 500 mm x Height 600 mm

Pass-through opening 2x on front side right ∅ 75 mm

Irradiation unit test chamber

Cutout 4x in side wall left for SC 2500 each 850 x 700 mm

Area to be irradiated when using SC 2500 1200 x 1200 mm

Radiation intensity at 1.0 m wall distance 1000 ± 10% W/m²

Lighting 1x Halogen lamp 200W

Cooling system Bitzer compressor semi-hermetic 2-stage, air-cooled

Condenser: Split condenser (outdoor installation winter control)

Refrigerant R507 /R23

Temperature control system

Cooling brine medium Tyfocor / water

Mixing ratio 50/50%

Density of cooling brine 1.072 kg/dm³

Filling volume approx. 80dm³

Pyranometer temperature range -40... 150°C

Max. radiation absorption 4000 W/m²

Spectral range (50% points) 305... 2800nm

Sensitivity (nominal) 7 µV/W/m²

Power supply test chamber

Electrical connection 400V, 3/N/PE, AC, 50Hz

Connection type Fixed connection

Max. simultaneous power requirement approx. 32.0 kW

Supply line fuse 3 x 63, Char C (A)

Power supply SolarConstant

Electrical connection 400V, 3/N/PE, AC, 50Hz

Connection type

Max. simultaneous power requirement approx. 30.0 kW

Supply line fuse 3 x 63, Char C (A)

External dimensions of the test chamber complete with: Equipment room/control cabinet

and control cabinet for SolarConstant 2500

External dimensions equipment room Width 3440 mm x Height 2580 mm x Depth 2950 mm

/Control cabinet Width 2200 mm x Height 1830 mm x Depth 1100 mm

External dimensions condenser, split Width 900 mm x Height 950 mm x Depth 2000 mm

Weight test chamber, total approx. 2700 kg

Weight condenser, empty 153 kg

Weight: 2700 Kg

Type: 3707/06

Condition: used

Scope of delivery: (See image)

(Changes and errors in the technical data are reserved!)

We would be happy to answer any further questions by phone.