CTS Temperature Chamber CTS T-40/2000 Temp. -40°C to +180°C 2000 liters

CTS

Type: T-40/2000

Temperature Test Chamber Air-Cooled

Technical Specifications:

Cooling Unit:
air-cooled, low noise full hermetic continuous power adjustment
through electronic monitoring and control system,
environmentally friendly refrigerant R404A

Door:
fully opening door, left hinge,
one-hand operation, lockable.

Shelf:
stainless steel, surface area 970 x 980 + 500 mm
maximum load per shelf 35 kg
total load at maximum shelf configuration 100 kg

Test Chamber Lighting: 3x Halogen Lamp 20 W, 12 V

Control:

32 Bit Controller
LCD Control Panel
Digital display of set and actual values
Numerical input of set values
Error messages in plain text
RS 232 interface
free switching channels for customer-specific test item control

Temperature Range: -40°C to +180°C

Nominal Voltage: 400V 3/N 50Hz
Nominal Power: 10.4 kW
Nominal Current: 17.2 A
Compressor: TFH2516Z

Pipe Connection NW 50
Control Panel
Window 570x710 mm
Electrical Connection, Cable Length 5m

Technical Performance Data:

Temperature Tests:
Temperature range -40°C to +180°C
Temperature deviation ≤ ±0.3 K over time
Temperature change rate according to IEC 60068-3-5
Heating 2.5 K/min
Cooling 1.5 K/min

Heat Radiation:
approx. 2500 W at +20°C
approx. 2100 W at ± 0°C
approx. 1500 W at -20°C

The technical data refer to an ambient temperature of +25 °C,
nominal voltage 400V, without test item, without radiation and without additional devices.

Dimensions:
Test Volume: 2000 Liters
Test Chamber Dimensions: Height 900, Width 975, Depth 2200 mm
External Dimensions: Height 1950, Width 1290, Depth 3145 mm

Operating Data:
Electrical Connection: 400 V +6/-10 %, 3/N, 50 Hz
Nominal Power: 17.2 kW
Protection Class: IP 22
Condensate Drain Pressureless R 1/2" Internal Thread
Sound Pressure Level (according to DIN EN ISO 3744
measured at 1m distance from the front) < 55 dB(A)
Weight: approx. 1200 kg

For your safety as a buyer, the following information!

The following points will be carried out in advance on our offered chambers:
1. Function check and replacement of necessary components
2. If necessary, new filling with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers will undergo a documented test run.

Condition: used

Scope of Delivery: (See Image)

(Changes and errors in the technical data are reserved!)

We are happy to answer any further questions by phone.