CTS Climate Test Chamber CW-60/6 -60°C to +120°C 6000 liters (6 m³)

CTS

CTS CW‑60/6 – Climate Test Chamber Water-Cooled

The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized,
walk-in or drive-in climate chamber for conducting temperature
and humidity tests on multiple specimens simultaneously.

Device Description
The climate test chamber can be used to test the function or material properties of a test specimen
under temperature and humidity influences.
The good air circulation with a correspondingly high recirculation volume ensures
effective transfer to the test specimen.
The air treatment area is located at the back of the interior space.
The units are located behind the device in a separate frame and are easily accessible.
The control system is housed in a separate control cabinet.
The control panel is integrated into the control cabinet door.
To dehumidify the test chamber, the test cell is equipped with a self-regenerating compressed air dryer. 
The test chamber can be flushed with fresh air via a blower.

Technical Performance Data:

Temperature Tests: 
Temperature range -60 °C to +120 °C
Temperature deviation ±0.5 to 1 K over time
Temperature change rate linear with test specimen 
and with heat input, measured in the supply air
Heating: 1 K/min from -40 °C to +80 °C
Cooling: 1 K/min from +80 °C to -40 °C
Test specimen: 700 kg steel
Heat input:
2 kW during temperature adjustment
5 kW in steady state at -40 °C

Climate Tests:

Temperature range +10 °C to +95 °C
Humidity range 10 % to 85 % relative humidity
in the dew point range +5 °C to +89 °C
Temperature deviation ± 0.5 K over time
Humidity deviation ±1 - ±3 % r.H. over time

The technical data refer to an ambient temperature of +25 °C,
nominal voltage 400 V, without test specimen, without radiation, and without additional equipment.

Dimensions:
Interior dimensions (test room / usable space):
Volume: approx. 6,000 liters (6 m³)

Interior dimensions (approx.): Height: ~2000 mm Width: ~2000 mm Depth: ~1500 mm
(slightly varying depending on configuration)

Exterior dimensions: Height: ~2300–2500 mm Width: ~2400–2600 mm Depth: ~1800–2200 mm
(depending on door, frame, accessories, etc.)

Operating Data:

Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz
Nominal power: 44.4 kW (including 5 sockets)
Nominal current: 84.7 A
Protection class IP 54

Technical Design:

Cooling unit
water-cooled, low noise, semi-hermetic, 
continuously variable power adjustment through electronic 
monitoring and control system, 
environmentally friendly refrigerants R 23 / R 404 A

Notes

Viewing by appointment possible (46325 Borken)

Shipping by freight forwarder possible – Costs & organization upon request

Scope of delivery: (See image)

(Changes and errors in the technical data, specifications are subject to change!)

We would be happy to answer any further questions by phone.