CTS Climate Test Chamber C-40/350 Ex/l 350 Liters -40°C / +180°C with Humidity

CTS

Type: C-40/350 Ex/l

Climate Test Chamber Water-Cooled

ATEX Zone 1

The Ex/l designation indicates that this climate test chamber is suitable for use
in explosion-prone areas of Zone 1.
This means it is intended for use in environments
where explosive atmospheres may occur.
Such devices are specifically designed and tested to ensure safety in such environments.

Temperature Tests:

Temperature Range -40°C to +180°C
Temperature Deviation ≤ ‡0.3 K over time
Temperature Change Rate according to IEC 60068-3-5
Heating 3.5 K/min
Cooling 4 K/min

Heat Compensation
approx. 3500 W at +20°C
approx. 2000 W at -20°C

Climate Tests:

Temperature Range +10°C to +90°C
Humidity Range 10% to 95% relative humidity
Dew Point Range +5°C to 78°C
Temperature Deviation ≤ 1.0 K over time
Humidity Deviation ≤ + 3.0 % r.H. over time

The technical data refer to an ambient temperature of +25°C, nominal voltage
400V, without test specimen, without heat compensation, and without additional devices.
Options may affect the performance data.

Technical Design:
Cooling Unit
water-cooled, low noise, fully hermetic, stepless power adjustment
through electronic monitoring and control system,
environmentally friendly refrigerant R404A

Test Chamber: Floor Load 150 kg / m2

Insert Rack: Stainless Steel,
Support Area 620 x 600 mm
Load per Rack max. 35 kg
Total Load at max. Rack Loading 100 kg

Control:
32 Bit - Controller
LCD Control Panel
Digital Display of Set and Actual Values
Numeric Input of Set Values
Error Messages in Plain Text
RS 232 Interface
Ethernet Interface
Free Switching Channels for Customer-Specific Test Specimen Control

Dimensions:

Test Volume 350 Liters
Internal Dimensions: Height 750 mm × Width 650 mm × Depth 720 mm
External Dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm

Operating Data:

Electrical Connection 400V +6/-10 %, 3/N, 50 Hz
Nominal Power 7.15 kW
Nominal Current 14.3 A
Protection Class IP 54
Sound Pressure Level <55 dB(A)

Weight approx. 500 kg

For your safety as a buyer, the following information!

The following points will be carried out on our offered chambers in advance:
1. Function check and replacement of necessary components
2. If necessary, new filling with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers will undergo a documented test run.

Condition: used

Scope of Delivery: (See Image)

(Changes and errors in the technical data are reserved!)

We would be happy to answer any further questions by phone.