Binder Switching Climate Chamber MKF 240 (E3) -40°C to 180°C with Humidity

Binder Climate Chamber

Here we offer a Binder Climate Chamber.

Air-cooled

Temperature range: -40°C to +180°C
Humidity range: 10% r.H. to 98% r.H.

The MKF climate chamber is a specially designed environmental simulation chamber for the
field of industrial material testing and environmental simulation, which far exceeds the capabilities of a normal heating chamber with its unprecedented performance. It meets all requirements for material testing as well as aging and stress tests.

The MKF climate chamber features a microprocessor-controlled display regulator with dual-channel technology for
temperature and humidity, with decimal degree and decimal percent digital display. With the extensive
program control, the MB1 display program controller allows for precise execution of temperature and humidity cycles
with rapid heating and cooling phases.

TECHNICAL DATA:

Dimensions:
Width: 1130 mm Height: 1713 mm including feet / wheels
Depth: 946 mm including cable and door handle
Interior dimensions: Width: 735 mm Height: 700 mm Depth: 443 mm

Measurements:
Interior volume: 228 liters
Net weight of the device (empty): 360 kg
Maximum total load: 70 kg
Maximum load per shelf: 30 kg

Performance data temperature:
Temperature range: -40°C...180°C
Temporal temperature deviation: 0.1...0.5 ± K
Spatial temperature deviation: 0.5...2.0 ± K
Average heating rate according to IEC 60068-3-5: 5.0 K/min
Average cooling rate according to IEC 60068-3-5: 5.0 K/min
Max. heat compensation: 2800 W

Performance data climate:
Temperature range: +10...+95°C
Humidity range: 10...98% r.H.
Temporal temperature deviation depending on setpoint: 0.5...3.0 ± K
Dew point temperature range +5 to +94°C
Max. heat compensation: 300 W

Electrical data:
Nominal voltage: 400V 3N~ ±10% 50Hz
Nominal power: 5.10 kW 7.8 A
Energy consumption at 25°C / 60% r.H.: 1.5 kW

Article number MKF 240 (E3) 9020/9120-0132 400V

Type: MKF 240 E3

For your safety as a buyer, the following information!
 
The following points will be carried out on our offered chambers in advance:
1. Function check and replacement of necessary components
2. If necessary, new filling with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers will undergo a documented test run.

Condition: used

Scope of delivery: (See image)

(Changes and errors in the technical data are reserved!)

We are happy to answer any further questions by phone.