Zwick / Roell Material Testing Machines zwickiLine Z0.5 0.5 kN

Zwick / Roell

Type:  Zwick / Roell Z0.5  500N zwicki

Material Testing Machine

Zwick / Roell Year of Manufacture 2020
Product Information
Material Testing Machines zwickiLine Z0.5

Application Area:
The zwickiLine is a powerful, flexible, and yet cost-effective testing solution for a variety of materials and components.
The material testing machine is equally suitable for research and development as well as for ongoing quality assurance.

With its diverse equipment options, the zwickiLine can test plastics, elastomers, metals, composite materials,

paper, cardboard, textiles, foams, food, or components from the medical technology and pharmaceutical industries.

ZwickRoell material testing machines of the zwickiLine can be used in production and testing areas of cleanroom classes 5 and 6.
According to DIN EN ISO 14644 1:2016-06; DIN EN ISO 14644-14 and VDI 2083 Page 9.1, the cleanroom suitability of the material testing machines has been confirmed.

Technical Data:
General technical data for the zwickiLine

Load Frame:
Coating A6-C31, RAL 7021 and RAL 3038
Ambient Temperature +10 ... +35°C
Relative Humidity (non-condensing) 20 ... 90%
Compliance ISO 9000 and CE
Drive:
Motor DC Servomotor
Control, Setpoint Specification Digital
Controller Adaptive
Cycle Time 1000Hz
Positioning Repeatability (without direction reversal) ±2 μm

Machine Electronics
Number of available slots for measurement and control modules:
synchronized module slots 2 (expandable to 5)1)
synchronized PCIe slots 1
Force Measurement Class 0.5/1 depending on the load cell, according to DIN EN ISO 7500-1, ASTM E4
Measuring Range up to 165 % of Fmax2)
Calculated Resolution (e.g., load cell in tension/compression direction) 24 bit
Effective Resolution in tension/compression direction:
DCSC Module 19 bit (equivalent to ±512,000 points)
USC Module 20 bit (equivalent to ±1,000,000 points)
Measurement Value Acquisition Rate 400 kHz
Measurement Value Transmission Rate to PC 500 (optional 2000) Hz
Zero Point Correction automatic at the start of measurement
Measurement Signal Propagation Time Correction for all channels yes
Interface to PC Ethernet
Eco Mode yes automatic shutdown of power supply (time adjustable)
CE Compliance yes, according to Machinery Directive 2006/42/EC

Connection Values
Power Supply 100 ... 240 V, 1Ph/N/PE
Tolerance Range ±10 %

Material Testing Machines zwickiLine Z0.5
Testing Force Fmax 0.5 kN
Testing Space Height Pmin...Pmax (each without connection bolts)
Crosshead with angle mounted upwards 235 ... 1365 mm
Crosshead with angle mounted downwards 90 ... 1220 mm
Depth 105 mm
Width no restrictions
Load Frame Dimensions
Height without head crossbeam 1589 mm
Width 408 mm
Width with machine electronics 411 mm
Depth 480 mm
Depth with machine electronics 622 mm
Weight with machine electronics, approx. 81kg
Drive Crosshead Speed vmin ... vmax 0.0005 ... 2000 (optional 3000) mm/min

Condition: used

Scope of Delivery: (See Image)

(Changes and errors in the technical data, specifications are subject to change!)

Further questions can be answered by phone.