Zwick / Roell Material Testing Machine DO-FB020TN

Zwick / Roell

Type:  DO-FB020TN

Material Testing Machine

The material testing machine (MPM) described here
is a table testing machine with a maximum testing force of 20 kN.

Technical Data:

Type/Order No. DO-FB020TN

Load Frame:

Testing force in tension / compression 20 kN
Total height 1291 mm
Total width 857 mm
Total depth 346 mm

Weight:
with electronic unit 135 kg
with typical installations approximately 140 kg

Footprint:
net footprint 2966 cm²
specific ground load:
based on typical installations 0.05 kg/cm²
with 50% safety 0.07 kg/cm²

Working space height:
without installations 1014 mm
Working space width 420 mm

Coating RAL 7011, RAL 7038 and RAL 3031
Ambient temperature +10 to +35°C
Humidity ... 20 to 90%
Noise level 64 db(A)

Drive

Traverse speed:

in Stand Alone operation ..0.1 to 500 mm/min
in PC operation 0.001 to 500 mm/min

Accuracy of set
speed 1% of V nominal
Path resolution of the drive ±1µm
(without direction reversal)
Maximum testing frequency 0.5 Hz

Measurement and control electronics
Real resolution 100,000 digits
Measurement value transmission rate to PC 50 Hz
Zero point correction automatic at measurement start
Measurement signal transit time correction yes
Output interface RS 232
Required PC connection (when operating with PC) COM 1
The housing is designed to protection class IP 32.

Force measurement
The measurement electronics for force measurement comply with ISO 7500/1.
Class 1 In the range of 0.4% to 100% of F nominal
Class 2 In the range of 2% to 100% of F nominal

The percentage values are based on the nominal force (F nominal) of the connected force transducer.

Operating data:
Connection values
Electrical connection 115/230V (1Ph, N, PE)
permissible mains voltage fluctuation ± 10%
Power consumption (full load) ....0.8 kVA
Mains frequency 50/60 Hz
Mains-side protection of the supply line <=16A

Weight: 270 kg

Condition: used

Scope of delivery: (See image)

(Changes and errors in the technical data are reserved!)

We would be happy to answer any further questions by phone.