Zwick / Roell AllroundLine Z250 Material Testing Machine 250 kN BS2-FR250SW.A4K.003

Zwick / Roell

Type: BS2-FR250SW.A4K.003

Zwick / Roell Material Testing Machine 250 kN

Product Information:

Data Value:
Load Frame
Coating RAL 7021 and RAL 7038
Ambient Temperature +10 ... +35 °C
Humidity (non-condensing) 20 ... 90 %

Drive
AC servo motor with concentrated windings
Hiperface® motor feedback system
Control, setpoint specification Digital (Real-time Ethernet, EtherCAT)
Controller / Cycle time adaptive / 1000 Hz
Positioning repeatability at the crosshead ± 2 μm

Measurement and Control Electronics
Number of available slots for measurement and control modules 2 synchronized module bus slots (expandable to 5)
1 synchronized PCIe slot
Force measurement class 0.5 / 1 depending on the load cell, according to
DIN EN ISO 7500-1, ASTM E4,
Calculated resolution
(e.g. load cell in tension / compression direction) 24 bit
Measurement value sampling rate, internal 400 kHz
Measurement value transmission rate to PC 500 Hz (optional 2000 Hz)
Zero point correction automatic at the start of measurement
Measurement signal propagation time correction for all channels yes
Interface to PC Ethernet
Eco Mode yes, automatic shutdown of power section (time adjustable)
CE conformity yes, according to Machinery Directive 2006/42/EC

Connection Values
Power frequency 50/60 Hz
Electrical connection 400V +/-10% (3Ph, N, PE)

Z250 SW

Load Frame
Test force FN in tension / compression direction 250
Height  2340 ... 2360 mm
Width 1600 mm
Width with electronics unit 1820 mm
Depth 1040  mm
P 1: top, fixed crosshead top 1675 mm
P 2: bottom, fixed crosshead top 1655  mm
P 3: bottom, fixed crosshead bottom 1595 mm
P 4: top & bottom, with additional crosshead 1440 mm
Total weight with electronics 2100 kg
Noise level at maximum test speed 70 dB (A)

Drive
Crosshead speed up to 0.00005
110% of the test force (vmin ... vNenn ) ... 600 mm/min
Increased crosshead return speed (at reduced force) 1000 mm/min
Path resolution of the drive 0.19227 nm

Connection Values
Power consumption 6 kVA

The machine is configured and equipped for cyclic pressure tests.

Condition: used

Scope of delivery: (See image)

(Changes and errors in technical data are reserved!)

Further questions can be answered by phone.