Tira Shaker Vibration Testing System TIRA vib TV 59335/AIT-640 TGT MOH 48

Tira

Type: TIRA vib TV 59335/AIT-640 TGT MOH 48

"Plus a replacement power module BPS 1514-P."

TIRA vib
Technical Data:

The specified data of the vibration exciter S 59335/AIT-640
is realized in conjunction with the power amplifier TIRAvib A 3 08 3 060.

Rated force SINUS 35,000 N
Noise 35,000 N
Shock 105,000 N*
Theoretical maximum shock value. Dependent on payload, amplifier, shock, and shock width.
Frequency range 5 Hz 2 kHz
Main resonance frequency
of the moving system 2.0 kHz
Max. acceleration SINUS 70 g
RANDOM 70 g
Shock 160 g
Weight of the vibrating system 41 kg
Displacement (peak-to-peak) 50.8 mm
Vibration speed SINUS 1.8 m/s
RANDOM 1.8 m/s
SHOCK 2.5 m/s
Max. payload 610 kg
Spring stiffness 150 N/mm
Mounting plate diameter 640 mm
Locking: Temperature, after-run, airflow, compressed air, emergency stop
Max. power consumption at 400 V
(Complete system without blower) 38 KVA
Max. power consumption at 400 V
(Blower) 17.5 KVA

Vibration coil:
Upper vibration coil guide: Spring elements
Lower vibration coil guide: Linear bearing (Hydrostatic dual bearing)
Spring stiffness (axial): 150 kN/m
Spring stiffness (perpendicular to axis): 2000 kN/m
Torsional stiffness: 25 kNm/rad
Max. payload: 610 kg
Current: 375 A eff
Impedance: 0.03 Ohm

Exciter coil:
Rated direct current (Lo/Hi Field) approx. 54/103.5 A
Rated direct voltage (Lo/Hi Field) 56/105 V
Resistance at 20°C 1.1 Ohm
Magnetic stray field, 150 mm above the table without < 20 mT
Demagnetization coil with demagnetization coil < 1 mT

Cooling air
Cooling air requirement 1920 m³/h

Dimensions and weight (including frame and sliding table)
Width 1600 mm
Height (vertical operation) 1248 mm
Length 2620 mm
Weight: approx. 8850 kg
Weight Thermobarrier TBS 120 57.6 kg
Weight Thermobarrier TBR 64 15.4 kg

Sliding table TGT MOH 48 XL
Total mass: approx. 8850 Kg
Dimensions: (L x W x H) 2620 mm x 1600 mm x 1228 mm
Usable frequency range: 0 to 2,000 Hz
Maximum pitch moment M: 91400 Nm
Maximum roll moment M: 82200 Nm
Maximum yaw moment M: 56000 Nm

Sliding plate
Material: Magnesium
Usable working area: 1200 mm x 1200 mm (48 in²)
Thickness of sliding plate: 50 mm
Moving mass of sliding plate with guides: 160.7 Kg
Mechanical lift limit: 62 mm
Maximum test mass: 6000 Kg
Thread inserts: M10

Oil supply unit
Type: Hydraulic unit
Maximum operating pressure: 200 bar
Oil type: HLP 68
Flow rate: 1.4 l/min
Connection voltage: 3P/N 400V / 50Hz
Oil reservoir: approx. 40 liters
Dimensions (WxHxD): 1000x1200x400 mm
Weight: 160 kg

Mass of the movement system:
Sliding plate with guide system 160.70 Kg
Drive rod 8.44 Kg
Vibration anchor 41.00 Kg
Total mass of the movement system 210.14 Kg

Amplifier A 3 08 3 060

Sine continuous power: 57000 VA
Frequency range: DC 4 kHz
Optimal load resistance: 1 Ohm
Switching frequency: 82 kHz
Voltage, max.: 150 V
Current, max.: 375 A
Signal input voltage (switchable): 2.5/5/10 V
Harmonic distortion: < 0.7 %
Signal-to-noise ratio: > 90 dB
Weight: 600 kg
Dimensions (Width / Height / Depth): 600 mm / 2200 mm / 800 mm

BPS 1514-P

BPS 15-1M
AC / DC signal input with switchable gain
LCD display with touch function
Current limitation
Voltage limitation
Adjustable output voltage correction
Safety system
Monitoring of input voltage
15 digital error inputs
15 digital error outputs
Electronically controlled input sensitivity
Remote controllable
Power supply external +/24V / each 2A
Compatible with the BPS 24 phase control and monitoring unit
Switch for noise mode
Analyzer for input signal
Short circuit monitoring for external load (internal)
Booster for connecting up to 18 amplifier modules (internal)
Connection for black box for signal recording
Shut-off function for current and voltage clipping (adjustable)
Shut-off function for input signal distortion (adjustable)

Water cooling unit

Condition: used

Scope of delivery: (See image)

(Changes and errors in the technical data are reserved!)

Further questions can be answered by phone.