PRAGOSIGMEX SHUT-OFF VALVE

We offer a new PRAGOSIGMEX SHUT-OFF VALVE.

Type: V30 111 540.53 Din 25

Installation
The valve can be installed in horizontal or vertical piping with regard to the flow direction. It is recommended to install the valve operated by a servo drive in the horizontal piping with the servo drive positioned above the valve. In other positions, the servo drive must be supported or suspended.

Actuation
The valve can be operated with a handwheel, chain wheel, or from a stand. Valves DN 15 to DN 150 can be operated with a linear actuator. The type of actuator and maximum pressure drop must be specified by the supplier.

Application Area
Shut-off device for water, non-aggressive liquids, steam, oil, and gases, for operating pressures and temperatures.

The valve is not suitable for regulation purposes.

Technical Description
Valve with yoke attachment. The sealing surface is welded into the housing, on which the shut-off cone rests. The spindle is sealed in the yoke attachment with a packing gland. The flow direction of the operating medium for DN 15 to DN 100 is below the cone, while for DN 125 to DN 200 it is guided above the cone with internal bypass, which serves to reduce the pressure drop before and after the closure.

Connection
Flange connection with dimensions according to ČSN 13 1060 and ČSN 13 1061.
Construction lengths according to ČSN EN 558.

PRAGOSIGMEX SHUT-OFF VALVE Type: V30 111 540.53 Din 25

PRAGOSIGMEX SHUT-OFF VALVE

Last seen

ABOUT US