Instron electromechanical tensile testing machine model 5582

Instron

Type: Instron Model 5582 Floor Model

Instron Electromechanical Tensile Testing Machine

The tensile testing machine allows for a wide range of tests on mechanical properties.
Simple adjustments to the setup enable the measurement
of tensile, bending, and compressive properties.

Instron electromechanical load frames are designed
to apply a load to a test specimen via the moving crosshead.
The drive system moves the crosshead upward to apply a tensile load on the specimen,
or downward to apply a compressive load on the specimen. A load cell,
which is mounted in series with the specimen, measures the applied load.
The load cell converts the load into an electrical signal that the control system measures and displays.
Load cells are interchangeable with others of different capacities and offer a range
of load measurement options limited only by the maximum capacity of the load frame.
Strain gauges (extensometers) can also be used in these systems
to measure strain.
The control of the testing system is done via a proprietary software program from Instron,
specifically developed for material testing.
Setting the test parameters, operating the system, as well as collecting
and analyzing test data is done through the software program.
Detailed information on operating the system via the software can be found
in the software's online help.
There is a control panel on the load frame.
The control panel, in combination with the software program, provides a flexible user interface,
allowing you to execute functions either from the computer or from the control panel.

Technical Data:

Test Types:
Strain measurements
Tensile stress-strain data
Modulus of elasticity

Basic Control Mode:
Position control with closed-loop feedback.
Load capacity 100 kN
Maximum speed 500 mm/min
Minimum speed 0.001 mm/min
Maximum force at full throttle 75 kN
Maximum speed at full load 250 mm/min
Return speed 600 mm/min

Crosshead speed accuracy
± 0.1 % in stationary condition and without
load measured over 100 mm or 30 seconds,
whichever value is greater.

Position accuracy (extension) operating range
Under no-load conditions equal to or less than ± 0.02 mm
or ± 0.05 % of the displayed measurement, whichever value is greater.

Position repeatability ±0.015 mm
Load measurement accuracy (at 25° C)
± 0.4 % of the measurement up to 1/10 of the load cell capacity.
± 0.5 % of the measurement up to 1/100 of the load cell capacity.
± 1.0 % of the measurement up to 1/250 of the load cell capacity.

Strain measurement accuracy
± 0.05 % of the full scale value or ± 0.5 % of the measurement, whichever value is greater.
Crosshead position control resolution 0.0598 μm
Acceleration time, 0 to maximum speed 660 ms
Emergency stop time 400 ms

Dimensions
Total travel distance of the crosshead 1235 mm
Frame width 1130 mm
Total width 1307 mm Depth 757 mm Height 2092 mm

Power Requirements:
Maximum power 1400VA
Voltage 100,120,220,240 V
25 A 47/63Hz

Weight: 860 kg

Condition: used

Scope of delivery: (See image)

(Changes and errors in the technical data, specifications are subject to change!)

We would be happy to answer any further questions by phone.