GeCma Components CHALLENGER 15i-2-HB-FMO High Brightness Display

CHALLENGER

Type: 15i-2-HB-FMO

Introduction:

The CHALLENGER 15i-2-HB-FMO is an intrinsically safe display for use in Zone 1 / Zone 2.
It is used, for example, for visualizing process representations in hazardous areas. The
display is characterized by an exceptionally high brightness of up to 650cd/m².
To display graphics from, for example, a PC, a transmission unit (e.g., CHALLENGER
TCV2i) is required. Distances of up to 400 meters between the display and
the transmission unit can be achieved.
A suitable intrinsically safe power supply is needed for power supply (e.g.
PSU14i/8/543).

Technical Data:

Housing Material: Steel Sheet/Aluminum
Housing Protection: Front IP66 (Nema 4X) with proper installation.
Storage Temperature Range: -20 °C - +70°C 10 to 90% rel. humidity.
Dimensions: Width 429 mm x Height 340.5 mm
Weight: 12 kg
Power Connection: Terminal K1, K2, K3 (0.5-2.5)mm² solid / flexible
Terminal Block K1: Power Circuits
Terminals 3 - 4, 5 - 6, 7 - 8, 11 - 12, 13 - 14 and 15 - 16
Values per Circuit
Voltage Ui DC 12.5 V
Current Ii 543 mA
Power Pi 6.8 W
Effective Internal Capacitance Ci negligible
Effective Internal Inductance Li negligible

Terminal Block K2 and K3: Power Circuits
Terminals 1 - 2
Values per Circuit
Voltage Ui DC 12.5 V
Current Ii 543 mA
Power Pi 6.8 W
Effective Internal Capacitance Ci negligible
Effective Internal Inductance Li negligible

Connection Interfaces:

Terminal K4, K5, K9 (0.5-2.5)mm² solid / flexible
Terminal Block K4: For connecting an ASD (application supporting
device) for data input/output, e.g., a keyboard
Voltage Uo DC 5.5 V
Current Io 71 mA
Max. External Capacitance Co 40 uF
Max. External Inductance Lo 1 mH

Terminal Block K5: For connecting a data cable from a
transmission unit, e.g., CHALLENGER TCV 2i
Voltage Ui DC 5.5 V
Effective Internal Capacitance Ci negligible
Effective Internal Inductance Li negligible
Terminal Block K9:
Terminals 1 and 2: Output (Power) Circuit, values
depending on the power supply connected to terminal block K3,
max. however
Voltage Uo DC 12.5 V
Current Io 543 mA
Power Po 6.8 W
Terminals 3 to 7: For connecting an ASD (application supporting
device) for data input/output, e.g., a keyboard
Voltage Uo DC 5.5 V
Current Io 71 mA
Max. External Capacitance Co 40 uF
Max. External Inductance Lo 1 mH
Connector X2: Video Input UVI (BNC connector)
Voltage Uo 2.5 V
Current Io 88 mA
Power Po 176 mW
Max. External Capacitance Co 100 uF
Max. External Inductance Lo 4 mH
for connecting an intrinsically safe video circuit with the
following maximum values:
Voltage Ui 6 V
Current Ii 188 mA
Power Pi 194 mW
Effective Internal Capacitance Ci negligible
Effective Internal Inductance Li negligible

Documents & Downloads

Data Sheet: User Manual

Condition: used

Scope of Delivery: (See Image)

(Changes and errors in technical data are reserved!)

We would be happy to answer any further questions by phone.