Atlas SUNTEST XXL+ Weathering Test Device with Xenon Lamp for Weathering Testing

Atlas SUNTEST XXL+ Weathering Test Device

Here we offer you an Atlas SUNTEST XXL+ weathering test device.

The Atlas SUNTEST XXL+ is a large test chamber with a xenon lamp for weathering and lightfastness tests,

which meets various ISO, ASTM, and ICH industry standards.

The horizontal exposure area of 3000 cm² represents the class best value for testing 3D samples.

Advantages:

Premium simulation of solar radiation according to CIE85 reference sun
Optional filters to simulate sunlight through window glass, etc.
Class-leading chamber design for testing 3D samples
Easy-to-use touchscreen interface with 13 languages to choose from
Pre-programmed standards for quick start tests
Access port for additional external sensors
Black standard temperature sensor (BST) according to ISO 4892-1
Automatic control of irradiance for various test requirements
    
Technical Data:

Power Supply:
Connection: (3P, N, PE) AC, CEE (32 A, 5-pole, 6 h)
Nominal voltage: 400 V ±10%,
Network frequency: 50 / 60 Hz
Nominal current: max. 29 A
Nominal power: max. 12.1 kVA [43.56 MJ; 41297 BTU/h]
Nominal power of xenon lamps: 1700 VA [6.12 MJ; 5802 BTU/h]
Xenon lamp current: max. 15 A
Relative electrical power: 53% – 120%
Light source:
Light source: 3 xenon lamps, air-cooled
Lamp lifespan (guaranteed): 1500 hours

Sample Chamber:
Capacity: approx. 3000 cm²
Dimensions (Width × Depth): 790 mm × 390 mm
Sample chamber temperature*: 20 °C – 70 °C
Black standard temperature*: 45 °C – 100 °C
Black panel temperature*: 45 °C – 100 °C
Relative humidity: 20% – 95%
Fan speed: 800 – 2500 rpm
Water capacity:
Water tank capacity: 60 l

Water Quality:
Conductivity: < 5 μS/cm
pH value: 6 – 8
Solids content: < 1 ppm
Silicate content
(measured as silicon dioxide SiO2): < 0.1 ppm
Water consumption of pure water:
Spraying: 0.3 l/min
Humidity:
(100% control of the humidifier): max. 0.03 l/min
Sample cooling (spraying, rear):
approx. 1.3 l/min (SAE)
Connection conditions for pure water:
Pressure: 2.0 bar ± 0.5 bar (200 kPa ± 50 kPa)
Cooling air requirement:
Per spray unit: max. 150 m³/h (Total 450 m³/h)
Sample chamber: max. 200 m³/h
Interfaces:
RS232
Ethernet
Memory card
Data recording:
RS232
Memory card
Dimensions and Weight:
Dimensions:
(without exhaust hood) 901 mm × 913 mm × 1720 mm
(with exhaust hood) 901 mm × 913 mm × 1950 mm
Empty weight: approx. 290 kg
(without operating materials)
Noise:
Noise level: <70 dB(A)
Ambient conditions:
Room temperature: max. 18 °C to 25 °C
Relative humidity: max. 50% (± 10%)
Laboratory conditions:
• Equipped with recirculation system
• Air supply volume of at least 650 m³/h
• Air filtration with filter class G4
• Dust-free

Type: Atlas SUNTEST XXL+

Condition: used

Scope of delivery: (See image)

(Changes and errors in the technical data are reserved!)
 
We would be happy to answer any further questions by phone.