Zeiss Coordinate Measuring Machine O-INSPECT 442

Zeiss Coordinate Measuring Machine

Type: O-INSPECT 442

Machine designation: Coordinate Measuring Machine
Machine type: O-INSPECT 442

The multisensor measuring machine O-INSPECT ZEISS enables
optimal optical or contact measurement of all properties.

The CALYPSO software allows simultaneous display of actual state, target profile, and deviations,
making measurement results very easy to recognize and interpret.

General data:
Dimensions: Width 1055 mm Length 1351 mm Height 1770 mm
Measuring range: X 400 mm Y 400 mm Z 200 mm

Weight:
CMM 800 kg
Workpiece, max. 20 kg
Noise level of the CMM < 70 dBA

Electrical data:
Supply voltage 100, 110, 120, 125, 230, 240 V~ (± 10 %)
Current type 1 / N / PE
Frequency 50 to 60 Hz (± 3.5 %)
Power consumption max. 1500 VA

Fuse:
at 230 V or 240 V C 16 A
at 100 V or 125 V 15 A

Travel speed:
Creep speed: SLOW function 0 to 5 mm/s
Setup operation 0 to 70 mm/s
Series measurement operation
Axis (X,Y) max. 200 mm/s
Axis (Z) max. 50 mm/s
Axis (3D) max. 287 mm/s

Environmental conditions:

For proper operation of the coordinate measuring machine,
the following conditions must be met.

Ambient temperature for operational readiness + 17˚C to + 35˚C

Relative humidity 40% to 70% (non-condensing)
Room temperature for measurement operation 20˚C ±1 K
Height above sea level 100-125 V: max. 3000 m above sea level
230-240 V: max. 2000 m above sea level

Measuring head system:
Measuring head system CFS
Data on measuring head types:
Measuring head type CFS 2mm
Measuring range 2 mm Working distance 61 mm Spot diameter 12.5 µm
Measurable surface inclination to the beam direction 90 ± 15°

Measuring range 3 mm Working distance 22.5 mm Spot diameter 12 µm
Measurable surface inclination to the beam direction 90 ± 30°

Measuring range 10 mm Working distance 70 mm Spot diameter 24 µm
Measurable surface inclination to the beam direction 90 ± 20°

The values for surface inclinations are limit values
and depend on the reflection behavior of the workpiece surface.

Rotary table:
Mass and resolution  
Mass of the rotary table 7 kg
Resolution 0.15’’
Dynamics:
Angular velocity max 50˚/s
Rotational speed 8.3 min-1

Scope of delivery:
In the standard version, the coordinate measuring machine of type O-INSPECT
is delivered with the following components:

Coordinate Measuring Machine (CMM)
Control (integrated)
Control panel
Computer with peripherals
Software - CALYPSO 5.2
Documentation
Measuring head system
Reference probe
Calibration standard
Calibration template

Scope of delivery: (Zeiss Coordinate Measuring Machine as shown)

Condition: used

(Changes and errors in technical data, specifications are subject to change!)

Please inquire about transport options before purchase.
 
We would be happy to answer any further questions by phone.