Wittmann Battenfeld Injection Molding Machine SmartPower 210/1330 with UNILOG B8

Wittmann Battenfeld

Type: SmartPower 210

Wittmann Battenfeld injection molding machine with UNILOG B8 control
The system was serviced / checked by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 and brought to the latest possible standard.
As part of the complete inspection, various updates were installed and the hydraulic oil (600 liters) was refilled.
In addition to the already normally present pressure switches, there is the possibility to install two additional cavity pressure switches (Kistler module for cavity pressure switching, range 1: 20,000 pC, range 2: 10,000 pC).

The parts for the upgrade of the cavity pressure switches are included in the delivery.

Injection Molding Machine:

Series: SmartPower
Machine type: 210/1330
Control type: UNILOG B8
Machine number: 137949-100
Machine weight, gross/net
Main dimensions of the machine
Noise level (DIN EN ISO 3744-46) 65 dB(A)
Ambient temperature +15 - +40°C (+59 - +104°F)

Year of manufacture: 2017

Operating hours: 1437 hours

Hydraulic System:

Hydraulic oil, tank capacity

Oil temperature min / max. (HLP 32) min 30°C (86°F) / max. 40°C (104°F)

Oil temperature min / max. (HLP 46) min 40°C (104°F) / max. 50°C (122°F)

Switch-on temperature for oil cooling (HLP 32) 35°C (95°F)

Switch-on temperature for oil cooling (HLP 46) 45°C (113°F)

Electrical System:

Drive power, hydraulic pump 37kW

Motor voltage

Frequency

Screw cylinder temperature max. 350°C (662°F)

Water System:

Oil cooler:

Cooling water consumption approx. 0.5 - 1.5 m³ / h (0.65 - 1.96 cu yd)

Cooling water inlet max. 35°C (95°F) NW ⅜"

Cooling water battery:

Cooling water inlet ∅ ¾", max. 10 bar (max. 145 psi)

Cooling water return ∅ ¾"

SmartPower 210 injection unit 1330

Screw diameter 50, 55, 65mm

Screw stroke 275mm

Screw L/D ratio 22

Calculated shot volume 540, 653, 913cm³

Specific injection pressure 2470, 2041, 1461 bar

Max. screw speed 278 min⁻¹

Max. plasticizing rate PS 42, 52, 62 g/s

Screw torque 1920 Nm

Nozzle stroke/nozzle force 400/100 mm/kN

Injection flow rate into free space 248, 300, 419 cm³/s

Cylinder heating power 21.9, 24.2, 27 kW

Number of heating zones including nozzle 5

Clamping unit SmartPower 210

Clamping force 2100kN

Link to a short demonstration video on YouTube:

https://www.youtube.com/watch?v=DGLJ1uijosw

Type: SmartPower 210

Condition: used

Scope of delivery: (See image)

(Changes and errors in the technical data are reserved!)

We would be happy to answer any further questions by phone.