Netzsch Dynamic Differential Calorimetry Maia DSC200 F3

Netzsch

Type: DSC 200 F3

Technical Data:

Measurement System:

Measurement Range:
-40°C: ± 600 mW
160°C: ± 650 mW
400°C: ± 850 mW

Digital Resolution:

0.2 µW/digit

Signal Noise:

0.7 µW RMS at 130°C
(equiv. to 3.6 µW peak-to-peak)

Signal Time Constant: > 2.5 s (Indium Melting Peak)

Reproducibility Onset Temperature: ± 0.1 K (Indium Melting Peak)

Reproducibility of Peak Areas: ± 1 % (Indium Melting Peak)

Heating/Cooling System

Temperature Range: (-150°C... 600°C)

Heating Rate: 0.1 to 100 K/min

Depending on Cooling Type:

Linear Cooling Rate: s 20 K/min to -100°C

Liquid Nitrogen: -150°C ... 600°C
Cooling Time from 600°C to -100°C: approx. 15 min

Small Compressor: RT ... 600°C
Cooling Time from 400°C to 40°C: approx. 35 min

Compressed Air Cooling: RT ... 600°C
Cooling Time from 400°C to 40°C: approx. 20 min (depending on air flow)

Aluminum Heat Sink: For uncontrolled cooling, cell must be cooled below 300°C
Cooling Time from 300°C to 25°C: >20 min
(depending on the heat sink temperature at the start of the cooling phase)

Intracooler 45: -40°C ... 600°C
The minimum cooling time from room temperature to -40°C is approx. 30 minutes*.
(*Values were determined at an ambient temperature of 20°C)

Measurement Part: 580 x 560 x 280 mm

Software and Dongle included!

Sale from location!!

Condition: (used)

For further technical information, please refer to the manufacturer.

Scope of Delivery: (As shown)

(Changes and errors in technical data are reserved!)

We are happy to answer any further questions by phone.