isel 1-axis stepper motor controller IT 142-C and spindle drive LES 4

IFM Bus System AS-Interface

Here we offer an IFM Bus System AS-Interface.

The isel stepper motor controller IT 142.1-C is a control device for a bipolar stepper motor. It features a processor board,
a power output stage, and an AC power supply with monitoring of safety-relevant components. The operating system of the processor board allows programming of the controller in both CNC (memory operation) and DNC mode (direct execution).
This enables data to be either executed directly or stored in static RAM. An optional battery ensures that the RAM data is retained even after a power failure.
Additionally, the processor board supports a replaceable credit card-sized memory.
Besides pure positioning commands, the operating system also allows processing of eight opto-isolated signal inputs and 16 relay switching outputs.
To connect to a control computer, the interface card has a serial interface according to RS 232. The controller complies with EMC regulations.

Housing
- Steel sheet housing with enclosure made of powder-coated aluminum half-shells, W = 250, H = 186, D = 310 mm
- 19-inch rack mount housing with 4U front panel

isel interface card UI 4.C-E/A
8-bit microcontroller with stepper motor operating system 4.1
Maximum positioning speed 10,000 steps/s
32 kB data memory, optionally with battery for data backup
8 opto-isolated signal inputs and 16 relay switching outputs
Prepared for the use of a credit card-sized memory 32 kB
Serial interface according to RS 232

Type: IT 142-C with linear unit and spindle drive - LES 4

Scope of delivery: (See image)

2 weeks commissioning guarantee

The device comes from a stock clearance.

We also offer express shipping (DHL, UPS, TNT)
 
We are happy to answer any further questions by phone.

Written orders possible via email or fax