IPTE OLED Burn-In Electrical Test Station with Keithley 2612B and Keithley 3706A-S

IPTE OLED BurnIn Electrical Test Station

Here we offer you an IPTE OLED BurnIn electrical test station.

IPTE OLED BurnIn electrical test station consisting of...

6X Keithley 2612B Multifunction Device (SMU), SourceMeter, ± 200mV to ± 200V, ± 100nA to ± 10A, 60W
11X Keithley 3706A-S Digital Multimeter, Benchtop, Current, Voltage, Frequency, Resistance, Temperature, 3A, 300V, 7.5-digit
1X Keithley 3706 Data Acquisition System/Multimeter with 6 input slots, 10 different input modules selectable,
up to 14k measurements/s 7.5 digits resolution, 650k memory, Ethernet, USB, and GPIB interfaces

Function Description:
This is an electrical test station used for testing and BurnIn of
OLEDs. The OLED panel to be tested and the contact insert used in the test station
must match.

Inserting the Test Item:

The insertion of the test items (here: OLED) is done manually by the operator of the system.
The untested OLED panel must be placed in the holder of the opened
drawer. Care must be taken to ensure the correct orientation of the OLED:

Technical Data:
Manufacturer: IPTE Germany GmbH
Name: OLED BurnIn
Power Supply:
Supply Voltage: 400 VAC / N / PE / 50 Hz
Power Consumption: 4800 VA
Protection Switch Rated Current: 16 A
Compressed Air: 5.0 – 6.0 bar. Nominal pressure 5.5 bar ±10%.
Cooling Water: Flow Rate: 400 l/h
Water Inlet Temperature: +1 to +30°C

Dimensions: Dimensions B x L x H in mm: approx. 2,900 x 900 x 2,200
Weight: Test rack approx. 510 kg Test station approx. 290 kg
Noise Emission: < 70 dB(A)

Condition: used / gebraucht

Scope of Delivery: (See image)

(Changes and errors in the technical data, specifications are subject to change!)
 
We would be happy to answer any further questions by phone.