Horiba Jobin Yvon ULTIMA 2 ICP-OES Optical Emission Spectrometer
Item ID: 24348
Condition: Used
Stock: Only ${ $store.getters['24348/currentItemVariation'].stock.net } in stock
EUR 15,000.00
*
Content
1 piece
Unit price
EUR 15,000.00 / piece
The item is in stock
PAYMENT METHODS:
²

* Excl. VAT excl. Shipping
Horiba Jobin Yvon
Type: ULTIMA 2 ICP-OES
Optical Emission Spectrometer
Technical Description:
Ultima2:
Ultima 2 benchtop device, sequential spectrometer with a 1m monochromator,
2400 g/mm grating in first and second order 160-800 nm without image
Quick overview analysis
IMAGE:
Quick overview analysis IMAGE NAVIGATOR for JY 2000-2,
JY Ultima 2 or JY Ultima 2C
External closed cooling circuit for cooling the HF coil of the Ultima2
Argon humidifier - for the analysis of solutions with high salt content.
ULTIMA 2 ICP-OES - Optical Emission Spectrometer
reliable high-efficiency 40.68 MHz semiconductor generator
complete and precise wavelength scan from 160 to 800 nm as standard
highest practical resolution <5 pm from 120 to 320 nm
latest Rapid Chip technology for increased internal data transfer
fast and easy exchange cassette system for nebulization
unique radial plasma
highest load capacity with salt load
powerful Windows software package Analyst in German and Win-IMAGE
low argon consumption
The JY ULTIMA 2 is a benchtop device and consists of the following components:
OPTICAL SPECTROMETER
Czerny-Turner monochromator with computer-optimized geometric arrangement
Focal length: 1 meter
Scan speed: 0.009 s/nm across the entire spectral range
Spectral range: 160 nm to 800 nm as standard
the spectral range can be extended to 120 nm with the VUV option
direct grating drive with a mechanical reproducibility of ± 0.4 pm
extremely stray-light-free holographic gratings with 2400 lines/mm used in first and second order
Grating size: 110 x 110 mm for highest light intensity
Spectral ranges and resolution:
Order
2nd Order 1st Order
Spectral range: 160-320 nm 320-800 nm
Theoretical resolution /Kn: 528000 264000
Linear dispersion: 0.21 nm/mm 0.42 nm/mm
Bandwidth: 2.3 pm 4.6 pm
Resolution: 5 pm 10 pm
two selected "High Dynamic Range" (HDD) detectors, optimized for the respective wavelength range
Nitrogen flushing for measuring lines below 188 nm (optional: argon flushing)
programmable resolution through computer-controlled slits
the slit height of 6 mm allows observation of the complete analytical zone
in the plasma and thus saves tedious and time-consuming plasma observation optimization
highest thermal stability due to compact design and thermal regulation
fully automatic wavelength calibration ("Lambda Lock")
RF GENERATOR:
Low-maintenance semiconductor RF generator with automatic power control.
Air-cooled semiconductor radio frequency generator with high-precision frequency and power stabilization
the warm-up time after complete shutdown at gas consumption 0 L/min is less than 15 minutes
for highest laboratory productivity and cost reduction
computer-controlled power setting from 850 to 1550 watts in 50-watt steps
Excitation frequency 40.68 MHz with improved signal-to-noise ratio for lowest detection limits
automatic impedance matching for saline or organic solutions
automatic start and stop of the device programmable via software
patented Smart Hood chimney system for regulated exhaust air
optional remote diagnosis of the ICP spectrometer
High-frequency protection according to CE & FCC standards
SAMPLE INTRODUCTION:
The device is equipped with a quick-release torch and an exchange cassette system.
The low detection limits are achieved through stable, radial plasma observation,
the uniquely high light intensity, and the excellent resolution of the optics.
Completely disassemblable quick-release torch for cost-saving replacement of wear parts
patented coater gas flow to reduce memory effects and deposits in the inner tube
Cyclone nebulization chamber made of glass
Meinhard nebulizer
acid-resistant sample holder
optional: switchable argon humidifier for analysis with high salt load
optional: sets for the analysis of organic or acid solutions or suspensions
optional: ultrasonic nebulizer or micro-concentric nebulizer
optional: patented hybrid generator for simultaneous analysis of hybrid formers without conversion in the same run as the "normal" ICP elements
computer-controlled peristaltic double-head pump with 12 rollers (optional: as a three-head pump
Speed adjustable from the control panel in 31 steps, with fast run and fast stop function
Analyst SOFTWARE:
32 Bit Windows Software "Analyst
pre-programmed device parameters for various matrices
automatic interelement correction and correction of multiplicative interferences
On-Line help in German and On-Line interference display
automatic semi-quantitative determination of unknown samples
databases for matrices and standards
DIMENSIONS / CONNECTIONS:
Width 172.7 cm
Depth 72.77 cm
Height 75 cm
Weight 205 kg
Power single-phase, 220-240 V, 50-60 Hz, and 7.5 KVA
Water 2 to 3L/min, 3bar
Plasma gas 99.996% purity (welding argon)
Optics flushing nitrogen/argon
177 to 188 nm: 99.999% purity
165 to 177 nm: 99.999% purity
120 to 165 nm: 99.9995% purity
Exhaust air 500 m³/hour
Environment 20-80% humidity, 18-27° +/- 2°C
Condition: used
Scope of delivery: (See image)
(Changes and errors in the technical data are reserved!)
We would be happy to answer any further questions by phone.
| Technical characteristic | Value |
|---|---|
| Item ID | 24348 |
| Condition | Used |
| Model | ULTIMA 2 ICP-OES |
| Manufacturer | Horiba |
| Content | 1 piece |
| Weight | 150000 g |
EU Responsible Person
HORIBA Europe GmbH
Hans-Mess-Straße 6
61440 Oberursel
Germany
info.he@horiba.com
+49 6172 1396-0
Manufacturer details
Horiba
