GPA board charger with two board trolleys

GPA Board Loader

Here we offer you a board loader.

Main components of the GPA Board Loader

-Feeder
-Needle embossing unit
-Safety fence
-Board cart
-Control unit, control and switch cabinets

Technical specifications

Feeder (APZ)
X-axis: programmable 0 to 4,980 mm
Y-axis: programmable 0 to 7,500 mm
Z-axis: programmable 0 to 890 mm
Weight of gripping tooling: approx. kg
Oven 1 (old): 50 s cycle = 1.2 parts/min
Oven 2 (new): 25 s cycle = 2.4 parts/min
Cycle time of the system: 20 s

Embossing unit
X-axis: programmable 0 to 3,000 mm
Y-axis: programmable 0 to 1,950 mm
Z-axis: pneumatic 35 mm

Board cart
Board cart: 2 pieces
Rungs: plug-in
movable on rails: 4,000 mm
Motor: MOVIMOT bevel gear motor

Material
Form - Boards:
Length in transport direction: min. - max. 200 - 1,500 mm
Width across transport direction: min. - max. 100 - 2,000 mm
Thickness: min. - max. 1 - 4 mm
Transport load for feeder (part weight): max. 20 kg
Material steel 22 Mn B5 (1.5528) with Alu - Si coating
Pile height: max. 600 mm
Pile weight: max. 5 t
Palette weight: max. 20 t
Oven 1 (old) entry height: 1,100 mm
Oven 2 (new) entry height: 1,300 mm
Distance from Oven 1 to Oven 2: 5,000 mm
The oven rollways are cycled (Vmax. = 50 m/min) and transport the boards
in < 5 s.

Color scheme
Static parts: RAL 9001 Cream white
Moving parts: RAL 1004 Golden yellow
Cabinet color outside: RAL 7035 Light grey
Cabinet color inside: RAL 7035 Light grey
Base color: RAL 7022 Umbra grey
Color of the mounting plate: galvanized
Drives: RAL 7016 Anthracite grey

Control cabinet
Installation location: on the floor
Control cabinet: Rittal TS 8
Control cabinet size: W 2,000, H 2,000, D 600 mm
Base: 200 mm
Door design: Single and double door
Control cabinet lock: Double bit
Main switch: Door-mounted
Socket 230 V: yes
Control cabinet lighting: yes with motion sensor (IR)
Roof fan: no
Air conditioning: yes, door-mounted
Control cabinet reserve: 20 %
Control cabinet design: no
Switching devices: Siemens
Terminal design: screw terminals
Buttons, keys etc.: customer side

Control
Number of servo drives: 7 pieces with integrated absolute encoders and safety monitoring
Drive control: Siemens Simotion D 445
PLC: Siemens S7 317F-2 PN/DP
Internal bus system: Profibus / Profinet / Drive-Cliq
Visualization: Siemens MP 377 15" Touch panel
Number of tool sets for master data management: 100
Tool designation: alphanumeric, 10 digits
Tool data exchange with the press: no
Storage of tool data: CF card

Voltage
Supply voltage: 3 x 400 V PEN
Supply frequency: 50 Hz
Control voltage: 24 V DC
Valve voltage: 24 V DC
EMERGENCY STOP voltage: 24 V DC

Connection to the oven
Safety door interlock: 2-channel, potential-free
Signal interlock to the oven: DP/DP coupler in the GPA control cabinet

Signage
Signs: in German

The machine is already disassembled. Sale takes place from the location.

Condition: used

Scope of delivery: (See image)

(Changes and errors in the technical data, specifications are subject to change!)
 
We would be happy to answer any further questions by phone.