Farsoon Laser Sinter 3D Printer Farsoon FS HT1001P (CAMS System) + Accessories


Item ID: 25156

Condition: Used

Stock: Only ${ $store.getters['25156/currentItemVariation'].stock.net } in stock

The item is already sold

* Excl. VAT excl. Shipping

Farsoon


Type: Farsoon FS HT1001P
System setup Build Station, Preheating Station, Cooling Station

Automated job change between two build cylinders

Scanner from a Chinese manufacturer, deviating from the standard series
Modifications and Condition Upgrade of the overflow system with automatic pumping
Laser protection glasses renewed with approximately 200 operating hours
Heating elements renewed with approximately 500 operating hours
Access points for IR cameras available, cameras not included
Curtains installed in the build chamber
Operating hours Printer under 2000 hours
Dimensions 5585 × 3410 × 2980 mm
Weight approx. 5000 kg
Maximum build size 1000 × 500 × 450 mm
Build volume up to 15 liters per hour
Scanner 2 × high-precision 3-axis galvo system
Scanning speed up to 15.2 m/s
Layer thickness 0.06 to 0.3 mm
Laser 2 × CO₂ laser with 100 W each
Maximum chamber temperature 220 °C
Thermal control Multi-zone heating with intelligent temperature regulation
Temperature control continuous real-time monitoring and optimization
Operating system 64 Bit Windows 7
File format STL
Software functions manual and automatic control, real-time parameter adjustment, 3D visualization and diagnostics
Recommended materials FS3300PA, FS3250MF, FS3400GF, FS-TPU
Voltage AC 380 V, 3 phases, N/PE
Frequency 50 to 60 Hz
Total power 25 kW
Maximum current draw 45 A
Voltage fluctuation ± 10 %
Fusing 3 × 50 A
Preheating Station
No active preheating available
Used for storage of build cylinders for automated change
Rollers as protection against crushing and burning hazards
Cooling Station
Nitrogen flooding under sealing
Temperature measurement of the surface of the powder cake
Rollers as protective device
Cooling system Deltatherm
Compressor power 1.32 kW
Pump power 0.45 kW
Flow rate approximately 18 liters per minute
Pump pressure approximately 5.0 bar
Cooling medium Drinking water
Connections for supply and return 3/4 inch internal thread
Tank volume approximately 30 liters
Air volume approximately 2250 cubic meters per hour
One axial fan available
Fan power 135 watts
Dimensions Width 740 mm, Depth 740 mm, Height 500 mm
Weight approximately 110 kg
Unpacking Station (Powder Breakout Station)
Dimensions 1870 mm × 920 mm × 2150 mm
Weight approximately 1200 kg
 200-240 Volts
Frequency 50 to 60 Hz
Total power 2 kW
Maximum current draw 10 A
Powder handling Schleiss RPTech
Function Mixing, sieving, and conveying of plastic powders
System forms a complete powder cycle
Components Powder mixing system with mixer and sieving machine
Container for mixed powder, overflow powder, waste powder, and new powder
Pumps for material transport between containers
Moistening module available
Vibration motor for sieve not included
Powder handling mixing and sieving system technical data
Dimensions 1800 x 815 x up to 2600 height mm
Weight approximately 240 kg
Temperature range 0 to 40 degrees Celsius
Throughput Mixing up to approximately 10 liters in 8 min
Throughput Sieving 5 kg in 3 min
Voltage 230 Volts at 50 Hz with 16 A fuse
Power Mixer 210 watts
Power Extraction 2200 watts
Air requirement approximately 100 to 140 liters per minute
Operating pressure 5 to 6 bar
Condition: used
Scope of delivery: (See image)
(Changes and errors in the technical data, specifications are subject to change!)
Further questions can be answered by phone.

Technical characteristic Value
Item ID 25156
Condition Used
Model FS HT1001P (CAMS-System) + Zubehör
Manufacturer Farsoon
Content 1 piece
Weight 9000000 g
document.querySelector("form > input[data-mail='subject']").value = "Webshop - Frage zu Artikel - Artikel-ID: " + vueApp.$store.state.items[25156].variation.documents[0].data.item.id;

EU Responsible Person

Manufacturer details

Farsoon

3D Lasersinter

Show all