Concept Laser M2 "Classic" Single Laser

Concept Laser

Here we offer you a Concept Laser M2for sale.

The system primarily operated with 316L or other steels
Parameters for 316L, AlSi10Mg, TiAl6V4, Ti, 1.2709, IN625, IN718 are included.
Build space:
250x250x280 mm (WxDxH)

Overall dimensions:
4200x5900x3009 mm (WxDxH)

1 Laser 400W
Power supply: 3P/N/PE AC 400 V, 32 A
6-10 bar compressed air required
Protective gas 5 bar Argon
Protective gas 5 bar Nitrogen
Manufacturing speed 2 cm3/h to 20 cm3/h (depending on material)
Scanning speed max. 7 m/s
Layer thickness LaserCUSING® 20 μm – 50 μm
Protective gas consumption approx. 2 m3/h
Laser system Fiber laser 200F or 400F
Protection class Laser protection class 4
Power max. 200W or 400W (cw operation)
Wavelength 1070 nm (infrared)
Laser beam diameter 50 μm
Storage and transport temperature -20 – 35 °C (-4 – 95 °F)
Operating temperature 15 – 35 °C (59 – 95 °F)
Temperature change max. 2 °C/h (2 °F/h)
relative humidity max. 80% (non-condensing) for indoor use only
Installation height above sea level max. 2000 m
Electromagnetic radiation Do not operate devices that emit high-frequency radiation in the immediate vicinity of the machine

In 2020, the laser and laser cooler were replaced
In 2021, the F-Theta lens was replaced

Laser hours:
LaserOn Time: 46,525 min (which includes not only the actual build times but also waiting times after the build job)
Laser hours since last maintenance: 1230h

Laser power:
OS1 -> 48W/99W/147W/198W/250W/301W/351W/381W/396W

Weight: 2240 Kg

Condition: used / gebraucht

Sale from location!

Scope of delivery: Scope of delivery includes powder rack, 4 containers, build plates, sieve, and transport cart.

(Changes and errors in the technical data are reserved!)
 
We would be happy to answer any further questions by phone.