BIA Turnkey Test Systems Chassis Test Bench

BIA Turnkey Test Systems

Technical Data:

The BiA test stand offered here provides the opportunity to test shock absorbers in various test environments.
The shock absorber can be tested alone or including the wheel suspension to evaluate its properties.

Dimensions (Approx.): 4000 mm H x 5800 mm W x 6400 mm D

Data of the BiA test stand actuators:
z-actuator (road side):
-
Max. static force: 72 kN
-
Stroke: +/- 125 mm
-
Max. speed: 2 m/s
-
Max. acceleration: 200 m/s²
-
Frequency range: 0.1 – 100 Hz
y-actuator: (road side):
-
Max. static force: 21 kN
-
Stroke: +/- 50 mm
-
Max. speed: 1 m/s
-
Max. acceleration: 50 m/s²
-
Frequency range: 0.1 – 100 Hz
Vehicle mass actuator: (sprung mass):
-
Max. static force: 30 kN
-
Stroke: +/- 125 mm
-
Max. speed: 1 m/s
-
Max. acceleration: 30 m/s²
-
Frequency range: 0.1 – 50 Hz
Data of the Parker HPU (Hydraulic Power Unit):
High-pressure side:
- 1 x high-pressure pump with AC motor
- Proportional valve and check valve
- Filter 5 μm with 2-threshold clogged indicator
- Pressure measurement
- Manual valve
- Max. oil flow: 450 l/min
- Max. pressure: 28 MPa
- Enclosure to limit noise level to 70 dB
Low-pressure side:
- 1 x manual valve
- Filter 10 μm with single threshold indicator
- Heat exchanger with moisture detector
- Low-pressure pump (2.2 kW)
Additional:
- Oil level measurement within the tank
- Oil temperature measurement within the tank
- High-pressure pump load management
- Retrofitted moisture filters to prevent oil contamination with water

Sale from location!

Scope of delivery: (See image)

The BiA chassis test stand and the Parker HPU are for sale. A HiL simulation environment is not part of the offer!

(Changes and errors in the technical data are reserved!)

We would be happy to answer any further questions by phone.